cupra r gauges

[tom w]

thats what i i've been looking for that plug and i have had most of my dash apart ! you would think that the wiring looms on a cupra and a cupra r would be the same , doesn't help you can't get a haynes manual for this mark

 

[EvilKinevil]

doesn't help you can't get a haynes manual for this mark

what? shockin

will have another look for the plug this wkend, but looks like it aint there.

not sure what oil pressure sensor to use though? anyone advise?

 

[tom w]

oh ok, It just seems strange that seat sell a wiring harness which only looks like what you have with your gauges ,and there seems to be no plugs?

 

[EvilKinevil]

I've had a dig and just cannot find the plug so it'll have to be self wire.

Need to find the proper oil pressure sensor to install this though

can anyone tell me if this is the correct one? http://cgi.ebay.co.uk/SEAT-RANGE-OI...arts_Vehicles_CarParts_SM?hash=item27a8a540e5

as per the guide

 

[EvilKinevil]

right guys, got myself a gauge holder + gauges out an R.

have looked at the fitting guide (http://www.seatcupra.net/forums/showthread.php?t=72432) and that seems simple enough, just wondering if there is wireing already in-situ (2001 cupra) to just plug & play? as the gauges i got have a OE looking 4 pin plug

if not, i'm assuming I'm needing an oil pressure sensor? if so what sensor do I buy?, can someone point me in the right direction

cheers

No answers so far so,

Do you think my local dealer (Glenrothes) would be up to the task of ordering me all the bits to fit such an item if I wanderd in, or could somone give me a list of what I need to fit them?

Currently have;

Gauge holder + 2 gauges, thats it

Assume I need a oil pressure sensor, various wires. I'm not really sure tbh

any help appreciated

 

[nutzu]

on that clock is the oil temperature , not the oil pressure . you don't need any sensors . you just need to wire them correctly to the existing sensors . i have these gauges from factory and i have a seat cordoba coupe tdi .