Cupra R Induction Kits... Opinions?

JenksFresh

JenksFresh

Active Member
Mar 23, 2014
63
1
South Yorkshire
Hey guys,

Planning on getting an induction kit for the car and was wondering what your opinions are on which ones best? I've currently got a Forge 007 Dump Valve fitted aswell so wanting best ideas.

Thanks Guys


Jenks

Seat Leon Cupra R 225 2004
 
i went for the s2000 filter, its cheap and sounds mint. but took it back off as it causing the car to drink the fuel.
 
I saw a ram air one for a decent price on flebay, think it was £80 and comes with a heat shield. Was thinking about getting this soon, not sure on quality etc but heard good things about ram air filters in the past...
Also have a look at the neuspeed p-flow, bit more expensive but is looks like a nice bit of kit
 
Hey guys,

I've seen the following one Pipercross Induction Kit for £102. Comes just as that tho, no heat shield or cold air feed and this is off www.awesomegti.com

91591dc5b3f61eb8b5f905ea45c67324.jpg



Jenks

Seat Leon Cupra R 225 2004
 
Just try an S2000 one to start with and see if you like it. I didn't mind it but got annoying.

Put an SFS 80mm TIP on mine and feel that's money better spent than an induction kit.

I took the S2000 filter off, went back to OEM Airbox with a piperX element in it
 
I have a k&n and hate it with a passion just ordered a s2000 filter as there cheap and a good alternative to the oil based air filters!!! I have the badger 5 tip and I can't fault that awesome kit
 
I have a Ram-Air one fitted (mentioned further up the thread) with the heatshield. Does the job brilliantly for me. Have had Ram-Air filters on previous motors and never had any problem's. Quality is spot on and fitting is a doddle.
 
I've got an ITG one in ours which we would swap for an original air box setup. it gives you a decent intake sound.
 
Speaking about the s2k filter I've got a 2005 leon fr auq and was wondering what size reducer I need to get one fit? and are there any other modifications I would need to make to get it to fit?
 
When i put an S2000 filter on mine the power was well down for some reason,as if it was strangling the engine....put a different filter on and the power was back. Was off ebay though so it could have been a fake.
 
Personally I would smooth airbox and put a panel filter in with a 3" cold air feed and Badger 5 80mm TIP .

I dont think the induction kits are worth the money, especially considering the price if them with a heatsheild.

I also remember reading on here that the gains arent that great either. just my two cents . lol
 
Didn't fancie modding my airbox tbh, I want a cone or induction kit as I have the forge 007 dump valve and want more chatter from this aswell as performance.

Not fussed about a massive gain as were booked in for a remap soon

Jenks

Seat Leon Cupra R 225 2004
 
Last edited:
Where you off for the remap mate?

I might still have an old cone that I ran on the cupra R for a bit, could try it and see if you like the sound before shelling out any cash
 
You must log in or register to reply here.

Similar threads

AceD909
Help Needed: Cupra R (1M) PR Code G92 — Which Front Top Strut Mounts Are Actually Correct?
Replies
9
Views
2K
Battoussai
Battoussai
ExiledWeegie
New remap problems
Replies
2
Views
3K
ExiledWeegie
ExiledWeegie
Casty
[Help] Rear bearings Replacement - 2019 Leon ST Cupra R 4Drive DSG7 (rumbling noise)
Replies
16
Views
2K
SuperV8
SuperV8
Mk1 Cupra R starting struggles
Replies
4
Views
2K
Hobbsy02
Refreshing suspension and future maintenance
Replies
14
Views
3K
Alexis27
Alexis27
Adrian Flux insurance services - discount for forum members.
Top Bottom
Back