Denso Ik22 spark plugs

[GarryGti]

Hi all,

just been out for a drive and it seems that sometimes when i put my foot down the car splatters then kicks back in. I'm jumping to the conclusion my plugs need changing as its at 53k now
Have had a search and it seams Denso Ik22 spark plugs are the way forward
I'm i correct and any one go a link for me to get some.I'm going to do them anyway.

 

[ibizacupra]

i ran them and were fine for me

 

[DaNnY_LaD]

i am running them and i highly rate them

 

[dsrr]

I have run them and the standard NGK PFR6Q's and there is no difference whatsoever on a standard or mapped car ( had them both ( just the IK's wear quicker than the NGK's and are easier to damage if setting the gap. ( IMHO)

 

[IbizaAlex]

Im running the NGK BKR7EIX Iridiums. Once the gap was set they have been spot on. We run the IK24's on the race car, but they are silly money. Have your plugs never been changed?

 

[GarryGti]

cheers guys!

what gap should they be set at?

So is there any real difference in what plugs u use?

 

[GarryGti]

Im running the NGK BKR7EIX Iridiums. Once the gap was set they have been spot on. We run the IK24's on the race car, but they are silly money. Have your plugs never been changed?

not sure mate. Its got a full service history but i will have to look to see if they have been changed.But i hav't done them yet.

 

[dicko's]

does anyone know what gap these should be set at?

thanks

Sarah

 

[ibizacupra]

as supplied is how I run mine.
on a fresh set for its new tubby

 

[Myki da Pyki]

Highly recommened the IK22's. Mine ran much better on them than on the BKR's

 

[DPJ]

Yep, they are fine in mine.

 

[Myki da Pyki]

Im actually running the Denso IK's in my skyline now with good effect, not IK22's but still the IK range plugs

 

[dubz_wm]

where can i pick up a set of IK's? im guessing not halfords lol

 

[dubz_wm]

brought a set online, 36quid plus p+p do the gaps need to be ajusted or will they go straight in??

 

[truCido]

I got mine from ebay!! Was £30 for a set I think, i put mine straight in and had no problems

 

[dubz_wm]

balls! lol oh well there on there way now

 

[ibizacupra]

Badger5 also supply these as Badgerwagen uses em.

 

[Ricardo_Smooth]

for how much?

 

[dubz_wm]

are they goin to be ok for a standard engine then???