DIY hardwire dashcam installation
- Thread starter terryt
- Start date
Either flock your dash or make a polarising filter using a pair of 3D glasses.Mines in as well now, big thanks to Terry for the detailed instructions and list of parts
One thing I noticed, is that you do see a bit of reflection from the dash on the video, so the demister vents and speaker grille, not sure we can do anything about that. Everything else seems good!
Mines in as well now, big thanks to Terry for the detailed instructions and list of parts
One thing I noticed, is that you do see a bit of reflection from the dash on the video, so the demister vents and speaker grille, not sure we can do anything about that. Everything else seems good!
A CPL filter over the camera lens can help reduce dashboard reflections but finding one that fits can be a pita.
Last edited:
http://pages.ebay.com/link/?nav=item.view&id=351321611081&alt=web
Will take a bit of DIY to attach it though.
Will take a bit of DIY to attach it though.
I used a magfilter for my panorama X2, which I bought from Niko over on dashcamtalk (http://hiniko.com/index.php?route=product/category&path=166_167)
Works a treat for the panorama but finding one for my Mobeus is nigh on impossible.
Found another link here http://mogopod.com/collections/magfilter-products
Works a treat for the panorama but finding one for my Mobeus is nigh on impossible.
Found another link here http://mogopod.com/collections/magfilter-products
Last edited:
Hmm, might have to see what can be attached to the 0805, looks like the 0806 is prepared for a filter.
It's not massively bad, I tend to notice these things. I've only recorded one trip since installing so will keep an eye on it.
Thanks for the info all by the way
It's not massively bad, I tend to notice these things. I've only recorded one trip since installing so will keep an eye on it.
Thanks for the info all by the way
Last edited:
Ah just found that one terry, not sure how I missed it reading this thread a few hundred times
- Will have to do some digging and work something out, surely can't be camera specific though as even our eyes see this reflection in certain lights. Every camera must have this issue?
Finished my hardwire this morning.
I pulled the A-Pillar trim off and taped the cable to the loom that runs up there, and pulled the headlining down slightly at the top to get the cable under then just pushed it under with my fingers right the way across to where it drops to the camera. Quite an easy job compared to some cars I've worked on.
I pulled the A-Pillar trim off and taped the cable to the loom that runs up there, and pulled the headlining down slightly at the top to get the cable under then just pushed it under with my fingers right the way across to where it drops to the camera. Quite an easy job compared to some cars I've worked on.
I couldn't deside between the mini 0805/0806 or the mobius both with pluses and minius, looked to purchase the later and then saw issues with the newest model. So went back to the 0806 which also has issues too!
So finally found the 0805...
Do any of you guys have issues with dab interference, think it's more so with the mobius?
So finally found the 0805...
Do any of you guys have issues with dab interference, think it's more so with the mobius?
I have a small amount of interference which only started when I installed the 0805.
DAB will sometimes lose signal momentarily then come back again. Generally worse in built up areas.
DAB will sometimes lose signal momentarily then come back again. Generally worse in built up areas.
Btw terryt, great guide. Couldn't of done it any better myself
Thanks, glad it has helped some people out
Mini 0805 uses micro usb.
Got my 0805 today, had a quick try and seems good.
I've held it up where i've considered fitting it to the screen and you can see on the right in the shot the rain sensor housing. This is in my Golf BTW, new Leon will be with me soon i hope.
I was hoping to stick the mount in the black dotted area behind the review mirror, will find out once i have the new car but wondered how high up you guys have fitted the Minis?
I've held it up where i've considered fitting it to the screen and you can see on the right in the shot the rain sensor housing. This is in my Golf BTW, new Leon will be with me soon i hope.
I was hoping to stick the mount in the black dotted area behind the review mirror, will find out once i have the new car but wondered how high up you guys have fitted the Minis?
Thanks, i was trying to get a bit higher than that to hide from the outside a tad more
Similar threads
