Today's mission.....fix air ride.
Last week the touch pad went dead with no lights on it at all meaning I couldn't control the system at all, bit of a pain in the arse. Lucky it was on the normal driving height. So quik call to luke and after a convo we came to the conclusion that it may be the E-level ECU. So luke popped a new one in the post. Me and my mate wiped the cover off and we were greeted with this....oh joy
New unit
The
problem...no lights
Yey, the four plugs at the bottom of all that, is what I need to get at
So me and my mate ripped out what we could, credit to the guys at plush it was put together really nice. Labelling up the air lines and electrical connections as we went. Once the air lines were taken out the car dropped, meaning we had to fix it or uh oh would be stuck.
Dropped
Old vs new
New ecu fitted, the
problem still remained....so more investigating, multi-meter oot
Now to front
Now it was getting voltage all the way along the board, strange. After trying a few more ideas with Luke over the phone we were almost stumped, we rebuilt the system back up and checked voltage again it all seemed fine. I have no idea what we did,but we had life!!!
It didn't look as good as when plush made it up oops
But we noticed that one of my compressors wasn't working, but it still works off one. I'm booking into plush for my health check a few days before ed38 and since I'm down there I'm also I'm talks for a couple more little bits