Faulty lambda senor/ 02

[Smoki333]

Had this come up on vagcom, Cleared and come back.

Worked fine until i put my sports cat on.

17526 - Oxygen (Lambda) Sensor Heating: B1 S2: Open Circuit
P1118 - 35-00 - -
17522 - Oxygen (Lambda) Sensor: B1 S2: Internal Resistance too High
P1114 - 35-00 - -
16524 - Oxygen (Lambda) Sensor B1 S2: No Activity
P0140 - 35-00 - -

Tried unpluggin and repluggin same thing.
Is this the one before or after cat?
Should i just replace it with a universal or proper job.

Cheers jay

 

[goble]

after the cat.
b1= bank 1
s2 = sensor 2
replace with proper one as resistance needs to be correct for ecu

 

[Smoki333]

ok cheers, dont think it has anythin to do with the cat??

 

[goble]

could be

 

[Smoki333]

anyone know the part number for the sensor after the cat!?

Cheers

 

[Smoki333]

could be

what would Internal Resistance too High mean?

 

[goble]

that the resistance of the sensor is too high,which can be measured in ohms.
but is probably down to damaged internals.

 

[Smoki333]

ok cheers, i'll look at getting a new sensor.

Anyone will a part number? 2000 x plate cupra 1.8T

Cheers for the help goble!

 

[PAUL HEV]

Lambda probe after cat: Part no. 6K0 906 262 B Cost from dealership - £96.21 + VAT

top of the page there is a list of part numbers for ibiza's its in there iirc

 

[hadz]

u beat me 2 it! i have just had this same problem with mine! the engine management light came on so i took it to the dealers and they cleared the fault and it was fine over the weekend , but lastnight it came back on. So i took it back to the dealers 2day and the lambda probe after the cat is faulty. I got told £164 to change it all in!