t121anf

Newbie
May 14, 2004
573
9
Would someone confirm that a service won't remove changes made by vag-com.

Only changes so far are needle sweep and an attempt at digital mph (all changed but not displaying)
 
Would someone confirm that a service won't remove changes made by vag-com.

Only changes so far are needle sweep and an attempt at digital mph (all changed but not displaying)

Nope, they didn't reset any of mine. The only thing they do is pull the DTC the same as an Auto Scan is vag com.

As for the not displaying the digital mph. Did you follow the last step and un-ticking the "Alt. speed dis." in the MDI settings?
 
Would someone confirm that a service won't remove changes made by vag-com.

Only changes so far are needle sweep and an attempt at digital mph (all changed but not displaying)
Just had first service done on my supercopa which I have needle sweep and cornering lights turned off. Nothing changed after service. :D
 
I have a 2012 supercopa and I followed instructions on here and it worked fine.

Instructions are on post 14 in here>>>>>>http://www.seatcupra.net/forums/showthread.php?t=333131&highlight=digital+speed

Hi Nath,

Double checked it today, as I wanted to out it back to GB prior to tomorrow's service.

Definitely doesn't work.

One thing I noticed was that the green letters are different on my screen (Byte 0 still), could this be the fault?


Image from the linked thread
20111018183349.jpg