Fitting a Neuspeed rear ARB

[ChrisP]

From what I know, these aren't a straight fit - talking about a 28mm rear item that is normally fitted to Golf MK2/3 models

What is needed to be altered or made to get these to fit my beeza? (its a P reg 8v GTI if that makes any difference)

Ta

Chris

 

[ibizacupra]

rear L shape brackets will be req'd to adapt to the Neuspeed drop links

 

[ChrisP]

Something you can supply bill, or put pictures up so I can understand what it is I need?

 

[edc]

There should be some pictures already posted up. I posted up some a long time back and I believe Bill did too.

 

[m0rk]

that or 2 droplinks on a bar.. that's what I've fitted most (when ARB's were fashionable for a year)

 

[ibizacupra]

Something you can supply bill, or put pictures up so I can understand what it is I need?

if you look under there you will see a ~10mm hole in the top of the lower shock mount tower on the rear beam.

if you imagine an L shaped piece of angle ~40mm x 40mm long with 10.5mm hole in it near each end of the L, then this brings you inward where the Neuspeed ARB drop links bolt to. You will also want some more M10 bolts/nuts/washers to bolt this on.

 

[ChrisP]

This is one of the pics that I have found Bill - is it still like this now, does it work like this?

 

[ChrisP]

ah, read futher on about brackets, will try and find those pics

 

[ChrisP]

aha, found it!

 

[ibizacupra]

yea crappy old piccy, but hopefully explains the description