I'm going to optimize the OEM Seat sound system a bit.
What hardware will be installed:
Front: Focal INSIDE IS-VW-180
Rear: Focal INSIDE IS-VW-165
DSP: Focal Impulse 4.320
Front Installation:
The tweeters have already been replaced. The INSIDE IS VW series is not officially approved for retrofitting in the Seat.
The 180mm Focal models will be installed in the front. The tweeters are the same, whether 180mm or 165mm...
Remove the A-pillar trim, simply pull it off, disconnect the tweeters, and then you can comfortably work on the trim at a table.
- Remove the original tweeters
- Now install the brackets for the new tweeters.
- Fit the existing adapter with the correct connectors so that you can connect to the OEM wiring.
That's sufficient for me for now. I've already installed both sides in the vehicle.
Front speaker 2 Part, New own answer
What hardware will be installed:
Front: Focal INSIDE IS-VW-180
Rear: Focal INSIDE IS-VW-165
DSP: Focal Impulse 4.320
Front Installation:
The tweeters have already been replaced. The INSIDE IS VW series is not officially approved for retrofitting in the Seat.
The 180mm Focal models will be installed in the front. The tweeters are the same, whether 180mm or 165mm...
Remove the A-pillar trim, simply pull it off, disconnect the tweeters, and then you can comfortably work on the trim at a table.
- Remove the original tweeters
- Now install the brackets for the new tweeters.
- Fit the existing adapter with the correct connectors so that you can connect to the OEM wiring.
That's sufficient for me for now. I've already installed both sides in the vehicle.
Front speaker 2 Part, New own answer
Attachments
Last edited: