Forge 007P can it stick?

[Gubien]

Have anyone experienced the piston was sticking in a forge 007p ?

 

[lc_allan]

I've heard people mention it before. Think it just needs a service, clean and some more high temp grease.
Contact Forge and they may send you a service kit.

 

[Gubien]

Ok, does anyone know if the service kit just include high temp grease?
Living in denmark, it might be easier just to go get the grease at a local store. (When I'm told what to get).

 

[lordgibbness]

Yep ask in the forge section and they'll let you know

 

[Mylo]

the service kit has 2 o-rings, new piston and a sachet of red grease

The new piston is overkill as mine was barely marked even after 20,000 miles use.

 

[wild willy]

the service kit has 3 O rings, 2 for the piston and one for the lid plus some high temp grease and a spare piston. i made the mistake of just regreasing and replacing the piston, it held vac well at the time but latter failed which took me ages to find as i had ruled the DV out as a posible suspect.

 

[Gubien]

Ohhh... have to order the kit then...