Front Lowering Springs 60 Mm

[A003H]

I Lowered My Leon All Round 40 Mm, And It Still Sits High At The Front ( It Is Bedded In)
So Any Ideas On Where To Pick Up A Front Set Of 60 Mm,
Tryin To Keep The Cost Down

 

[Saul]

what springs did you use?

 

[andycupra]

how did you lower it>? just springs?
when you say the front sits high, how high? or are you saying it sits high compared to the back?

cars often appear to sit low at the back, particularly after lowering.

 

[A003H]

jamex

USED JAMEX! BUT IT ONLY DROPPED APPROX 20MM AT THE FRONT!
IS THIS THE NORM? AS I READ LATER THAT 60 - 40 MM IS THE PREFERED?

 

[DPJ]

I think the springs you used are for a non-Cupra. The Cupra has shorter springs at the front, that's why the replacement springs haven't given you the drop you wanted.

 

[A003H]

lowering springs

Has anyoe lowered there car rear 40 mm and front 60mm??
if so what price did you pay?
cheers dudes/dudets!

 

[dainott2105]

if your trying to keep costs down mate then lowering it 60mm at the front will make it awful expensive on sumps and the splitter if you have one on there. Just something to think of

 

[Deleted member 20376]

cobra do quite a few for it depending on the model.
it will have lowered it the right ammount the problem is your original springs/shocks may have sagged the reason y it only seems like it has lowered it 20mm.

 

[A003H]

Hmm, some valid points... cheers!