-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Front Mount Intercooler
- Thread starter Joshkcupra
- Start date
They ship it via DHL, or they did with mine, and I basically had a call to my home phone giving me a code which I had to enter on DHL's website, and you pay it online. It was like £3.50, although I think it should've been like £30/40, but the invoice they sent said it was only worth $30
They're identical mate.. Well tell a lie, the china ones have larger end tanks for more flow
the china cooler has a bigger core than the s3 cooler.
china cooler 55-60mm core
s3 cooler 45mm
Final thing guys (or banksy lol) is there a guide to removing the air con pump & rad properly? Link?
there's no guide but its pretty straight forward once you get the front off the car.
you need a smaller AUX belt if you removing the air con.
i used this one,
http://www.ebay.co.uk/itm/GATES-V-R...ts=Car+Make:VW|Model:Golf&hash=item19edd21c8f
will deffo aid cooling mate, you should be gaining at least 15-20bhp 10-15ftlbs with this cooler.
hopefully mine will come before saturday.
Cheers banksy! No error codes or anything when it's removed? Did u remove the rad & the pump etc, or just the rad?
Josh - did u remove your air con while doing this? And again..forgive me lol..but you keep talking about how thick it is..it does just fit in the same place as the standard cooler doesn't it! Lol cheers
Josh - did u remove your air con while doing this? And again..forgive me lol..but you keep talking about how thick it is..it does just fit in the same place as the standard cooler doesn't it! Lol cheers
it will fit fine with the longer bolts. Just gutted i wont be getting mine fitted until September as i'm going to Birmingham next weekend, taking the lad to Thomas Land in Drayton Manor. Need to order a Waterpump, Oil pick-up and rear brake pads, will tackle it all in one go.
I will be doing lots of logging of IATs in various situations so will see how well it performs.
I will be doing lots of logging of IATs in various situations so will see how well it performs.
Get some pics up when it arrives mate, yours should hopefully be here very soon being a UK one. I ordered the china cooler direct from china for £183.88
i didnt order the one in the link i found one even cheaper.
this one. im going to do a full how to guide with pictures when it arrives.
http://www.ebay.co.uk/itm/TFSI-2-0T...arts_Vehicles_CarParts_SM&hash=item4624de1646
this one. im going to do a full how to guide with pictures when it arrives.
http://www.ebay.co.uk/itm/TFSI-2-0T...arts_Vehicles_CarParts_SM&hash=item4624de1646
No I kept my aircon, I live in Kent and it gets fooking hot in the summer down here!
Banksy you think it would add 15-20bhp?!
Banksy you think it would add 15-20bhp?!
Personally I dont get why everyone seems so obsessed with size (thickness) when it comes to the cooler....
Its something that interested me when I first started tuning Subaru's.
What about the design? Tube and Fin v Bar and plate etc.
And more importantly its overal design, particularly the fin design.
The function of the FMIC is not to be large in size and therefor flow more air, I doubt that even the oe coolers are restrictive as far as airflow goes. The turbo will have a max air flow and thats likely to be the most restrictive part as far as mechanical airflow goes.
Its all about its ability to reduce charge temps, allowing us to maximize performance. Large surface area is obviously good, assuming it can gain free ambient airflow across it.
I started typing some points up but actually this is a very good source of info.
http://www.are.com.au/feat/techtalk/intecoolersMR.htm
Its something that interested me when I first started tuning Subaru's.
What about the design? Tube and Fin v Bar and plate etc.
And more importantly its overal design, particularly the fin design.
The function of the FMIC is not to be large in size and therefor flow more air, I doubt that even the oe coolers are restrictive as far as airflow goes. The turbo will have a max air flow and thats likely to be the most restrictive part as far as mechanical airflow goes.
Its all about its ability to reduce charge temps, allowing us to maximize performance. Large surface area is obviously good, assuming it can gain free ambient airflow across it.
I started typing some points up but actually this is a very good source of info.
http://www.are.com.au/feat/techtalk/intecoolersMR.htm
Last edited:
what you want is one of these http://www.wagner-tuning.uk/vag-20-tsi--tfsi-intercooler-kit-169-p.asp
http://www.wagner-tuning.uk/vag-20-tsi--tfsi-intercooler-kit-169-p.asp
Similar threads
