Nope, but it should be a similar one.
...and the costs are nowhere near what that video quotes, since people bring their own cars.
-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
Golf R and Leon Cupra (my thoughts)
- Thread starter Tara
- Start date
Nope, but it should be a similar one.
...and the costs are nowhere near what that video quotes, since people bring their own cars.
There’s lots to like about my manual FWD 300st, and like I said I’m sure it would handle well on a smooth, dry track - like the original Cupra 280 vs Golf R vid by Autocar.
But for the majority of the time, I’m driving down bumpy, undulating B roads. And it just struggles to put the power down properly. All the way up through third gear, you're constantly having to fight with the wheel when you’re ‘on it’. Admittedly, I often drive in a spirited manner, and the problem would be less obvious at 7/10ths rather than 9/10ths. I don’t dispute that this scrabbling front end might make it more interesting to drive, but for me I’d have more fun if I had more traction and less torque steer.
I’ve come from a Renault Sport Megane and an M135i, both of which were more comfortable when hustled.
I’m going to try a different front tyre - currently on Conti Sport Contact 5, think I’ll try the Michelin Pilot Sport 4s (I’ve used the Pilot Super Sports on previous cars). See if that makes any difference...
But for the majority of the time, I’m driving down bumpy, undulating B roads. And it just struggles to put the power down properly. All the way up through third gear, you're constantly having to fight with the wheel when you’re ‘on it’. Admittedly, I often drive in a spirited manner, and the problem would be less obvious at 7/10ths rather than 9/10ths. I don’t dispute that this scrabbling front end might make it more interesting to drive, but for me I’d have more fun if I had more traction and less torque steer.
I’ve come from a Renault Sport Megane and an M135i, both of which were more comfortable when hustled.
I’m going to try a different front tyre - currently on Conti Sport Contact 5, think I’ll try the Michelin Pilot Sport 4s (I’ve used the Pilot Super Sports on previous cars). See if that makes any difference...
Perhaps somewhat controversially, I think I’m stock form the Mk3 struggles for grip much more than the Mk2 Cupra. Even taking into account a stage 1 Mk2 which would be similar power. Admittedly an insert does fix it, I don’t understand why they didn’t have something similar from the factory!
Deleted member 103408
Guest
@omegamv6 just to be clear there are 3 different types of mounts (engine mount, transmission mount, torque mount (or dog bone mount))
For stock and stage 1 the dogbone mount and good tyres make a huge difference (there are tons of threads on here about best ones). Unless you are chasing big power I would not go for engine mounts and or transmission mount as my personal view is these are much more for track work than daily drive cars.
For stock and stage 1 the dogbone mount and good tyres make a huge difference (there are tons of threads on here about best ones). Unless you are chasing big power I would not go for engine mounts and or transmission mount as my personal view is these are much more for track work than daily drive cars.
What you need is active engine mounts, so they go stiffer when you need them to. But then it would probably be cheaper to have a second car haha.
Deleted member 103408
Guest
Have to say I am very happy with my engine mounts they are much less intrusive that the Racingline ones but @paddy6789 did say that Racingline were only recomending them for Track Cars.
Would it be ok for you just to confirm the best dog leg mount to get and part number ? Not so much race spec but best compromise between wheel hop and vibration , thanks again for any help.
I am running 410 bhp/520nm set up.
It was tough on contis.
I bought pilot super sports and it is like night and day to be honest.
What this tire does to overal driveability on stage 2 is incredible.
Can you get these, apparently the CTS ones don't vibrate that much? I'll invest if I go Stage 3
Deleted member 103408
Guest
Sorry for delay in getting back on this.
Check out this thread https://forums.seatcupra.net/index.php?threads/confused-over-dogbone-mount.445484/ as you can see i personally have the Revo insert https://www.onlyrevo.com/product-de...b-chassis-lower-torque-mount-kit&engineid=194 but i got it as part of the complete mount kit (Engine, Transmission and torque mount) but that's because I need this to keep my power on the road.
From what i have seen I think the most popular was the 034 Motorsport but not been keeping up on whats best as i am very happy with what I have.
Tyres are also very important and I would also point out these mods are applied to Golfs and Audi's so its not just a Seat Issue.
I agree. The thing I noticed most going from a MK2 R to a 280 was the awful axle tramp (especially on the original Bridgestones) that afflicted that car. Whereas the MK2 would just spin wheel a tad then grip & go, the MK3 bangs away like the engine is about to fall out, until you cut the power.
Not 100% but with tyres it’s 99% there. Problem is you can’t complete my disable the traction control.
@theoldboy can you completely disable traction with the Revo ecu update?
Similar threads
