Hammerite Red Smooth on Brembos (PICS NOW INCLUDED)

[JamJay]

I guess it depends on the quality, I went for the proper 3M stuff.

 

[Deleted member 12147]

Fair enough, wasn't sure of the decal would start to peel off with the heat cycles and washing.

I didn't lacquer over mine for the reason mentioned. I have no issues with the decal pealing at all, still looks as fresh as the day I put it on. Only thing to remember is to make sure you apply it properly and all the corners/edges are fully stuck down before removing the backing paper.

 

[richybigman]

Ok cheers guys

 

[zan]

Has anyone gone for a different colour than red?

I'm considering mixing it up a little and going for a different colour with some new Brembo stickers

 

[ReDBull]

How long does it take to do? Can you get enough coats on and dried in a weekend? How many coats are recommended?

 

[MarkWales]

Not Brembo's I know but thought I would share these as I used brush on hammerite red

Before Front

After Front

Rears

these pictures were taken 70k miles ago as you can see I was replacing the pads and disks so thought it would be rude not to.

here is a winter photo -

hence the wheels and you can still see how bright the red is.