HELP EGR adjusting

[Bustermagic]

Hi, hoping somebody can confirm that the screen I have attached is the correct one to adjust the egr valve. I went to the engine section selected adaptions and selected channel 3.

The engine is a TDI 130

 

[thedervdoctor]

Firstly

click on Engine,
Then Log In, enter the number 12233.
Next Click "Adaption"
select channel 3 ERG should be displayed.
Then alter the second digit of the number to 3 replacing the number 2,
Click test, blip the throttle to reset the system, them click test.

You should see the duty of the valve reduce, then click save.
A warning will come up click "ok or Do it" this will save the new number

You can then exit and go back in and make sure its stored the new number ok.

And then test go drive, the exhaust should be cleaner and the amount of gunk in the inlet will be reduced! which is good!

 

[Bustermagic]

Thanks

 

[Modelmakerman]

Sorry to drag up an old thread but Im trying to do this on my Ibiza FR TDi PD130 and the save button is always greyed out so I cant click it to store the new value. What am I doing wrong?

 

[Modelmakerman]

No one else has this problem?

 

[sjolliff]

Are you using fully registered VCDS or the lite (free version)?

 

[Modelmakerman]

Fully reg.

This is the only adaptation Ive had this problem with. Ive done a few others like selective locking and alarm chirps with no problems.

 

[Modelmakerman]

Help!

 

[sjolliff]

Is your car running while it does this?

If so, try it not running

 

[Modelmakerman]

Thought you could only do EGR when its running?

 

[jcc-gttdi150]

Mine was done with just ignition on, not running and worked fine.

 

[asthpsw]

If I can find a Garage with VAG-com what settings do I use for a 09 Plate Golf TDI GT with 140BHP CR engine please ? also if this mod is done does the ECU record the fact that the EGR has been turned down and therefore could it invalidate a VW Warranty ?

Paul