ibiza cupra mk3 20v turbo -dual mass flywheel or solid?

[black magic 20v]

am just wondering r the mk3 cupra ibiza dual mass flywheel or r they solid?
thanks
carl

 

[karls cupra]

dual mass but lots of people convert them to a solid g60 one..

 

[black magic 20v]

so thats why i feel my clutch is slipping! cos it doesnt do it all the time only when i put my foot down! but if i get where the turbo is boosting its okay!!

 

[karls cupra]

not sure mate dont know alot about clutches sorry...

 

[black magic 20v]

oki doki mate thanks for yr help!

 

[clinch]

my clutch is exactly the same ! i am looking for a replacment clutch and flywheel not sure what to get ?

 

[black magic 20v]

its going to cost a lot of moeny to change both!!

 

[Adam R]

get g60 flywheel / clutch

its cheap too as the g60 is pretty old now

 

[black magic 20v]

get g60 flywheel / clutch

its cheap too as the g60 is pretty old now

will that cope with 190 to 200bhp and 220 to 230ft/ib?

 

[DaNnY_LaD]

will that cope with 190 to 200bhp and 220 to 230ft/ib?

vr6 setup 250bhp & 280lb-ft

 

[ChrisCurzon]

will that cope with 190 to 200bhp and 220 to 230ft/ib?

Was running this setup on my hybrid k03 and it was coping fine, so will easily cope with the figures your looking at

Good setup for the money, just over £200 for all the parts if i remember right

 

[Adam R]

as above

will be more than able to handle the power

 

[black magic 20v]

thank you for the info! people

 

[clinch]

a standard vr6 clutch is good for 300bhp my friend has a corrado vr6 supercharged running just over 300bhp and it has been fine do you need to get a conversion plate for the g60 flywheel ?

 

[black magic 20v]

Was running this setup on my hybrid k03 and it was coping fine, so will easily cope with the figures your looking at

Good setup for the money, just over £200 for all the parts if i remember right

does it fit straight on?

 

[ChrisCurzon]

Yes mate its a straight fit, heres a thread with all the parts you need, i bought everything the same as is on that list. When i did it just over a year ago cost me just over £200 for all the parts.

http://www.seatcupra.net/forums/showthread.php?t=170122

 

[black magic 20v]

i've just bought a flywheel its a o2a fly from a corrado 2l 16v! am just wondering wot clutch to get!!

 

[pj1985]

What power are you running or planning to run?

 

[black magic 20v]

What power are you running or planning to run?

i think its around 200bhp!
wot do u all think about a corrado vr6 lux clutch kit???