Intercooler DIY Piping solution?

[flashbsd]

http://cgi.ebay.co.uk/51mm-Universa...ryZ72205QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Tempted to do my own IC setup , i can get my own made, but this has caught my eye, and with the added bonus of having an engineer to hand, he can weld mounts for me for the piping and the intercooler.

one thing i will ask, whats the bore /pipe size on the std IC/forge FMIC one?

and are there any sesnors to be aware of, as i'm sure the forge one has a hole for a sensor?

 

[JKing]

probably your best bet would be to find someone local to you who has a FMIC and take measurements from their pipework and intercooler. That way you know it'll fit.

 

[sportbilly]

Check RickC's post out, I think this is what he used.

 

[cupra-neil]

Where abouts you from?

Neil

 

[m0rk]

no swages on that though...... i wonder if it'll hold

 

[RickC]

that pipe isnt very good you dont get many different bends, i bought 2 of the kit below, just so i had enough lol

2 x 90
2 x 70
2 x 45
2 x straight
2 x silicone 90
jubilee clips
silicone joiners,

that kit just has 90s in it, i only have 2 90s in my bends.

there is a map sensor on the LCR infront of the battery but forge sell adapter brackets that fit spot on.

 

[flashbsd]

cool, rickC you have pm