Is this in correct place

[markpile]

I have couple queries on my car first it appears totally standard apart from wheels and powerflow backbox, I was told standard boost is 0.6 but mine is running 1.2 so been told by a couple of people it could be mapped or the actuator has been wound in, it also runs a forge dv but it looks in correct place to me. Thanks

Sent from my C6603 using Tapatalk

 

[jake]

You need to get it on vagcom asap.

Log blocks 020 and 115. This will show if it's pulling the timing back and how much boost its making verse asking for.

I had this once were a car was running very lean due to the actuator being wound out.

If your on standard fuelling the cyclinders will show numbers around 7-12 you need to wind the actuator down till these numbers are no higher than 3 ideally. Personally wouldn't be driving on boost till it's checked.

 

[markpile]

And what if it's been mapped, will vagcom be able to tell me it's excellent on fuel pulls like well I think I'll have the afr checked also

Sent from my C6603 using Tapatalk

 

[jake]

yeah, as the actual will meet requested boost