Jaz's ibiza cupra TDI

Ye I will see if I can clock it abit more if not chop it and re weld it.

There is about half an inch but I set the actuator so if the turbo fitted it would be close so I had a lot of adjustment


IBIZA CUPRA TDI 244bhp
 
I will see if I can clock the compressor house more if that won't give me enough I will chop it and adjust it and weld it up.

There is about a inch but I set the actuator of the furthest setting so if the turbo went in it would be close so I knew I had a lot of adjustment to make sure it had enough clearance


IBIZA CUPRA TDI 244bhp
 
The cold side should rotated 360' without issues, just have to make sure the core is still central and oil return remains facing down ;)

Sounds good with the actuator, the only clearance issue I had was the driveshaft when resting on its wheels hit the actuator, so had to pull it out more.
 
Ye was talking to a guy the other day that fitted one to his for just uprated the clutch fitted single mass and uprated injectors and got 297 with 3 different rolling road printouts to prove


IBIZA CUPRA TDI 244bhp
 
having just brought myself a PD I'll been keeping a close eye on this! Awesome work due!! Where abouts are you based out of interest?
 
Just waiting for the final bits to arrive before I can start the Vklr build

Sent from my SM-G900F using Tapatalk
 
Hi guys I need some advice I want to upgrade the handeling of my car and was just wondering what is the best suspension for my car so that ibcan stilk drive it on the road without a back brace

Sent from my SM-G900F using Tapatalk
 
I've got a rarb fitted just wanted to replace the checks and dampers

Sent from my SM-G900F using Tapatalk
 
Sorry for the slow updates guys ive been soo busy at work the last few months i havent had time to do a lot. Im just waiting for the input flange and the custom downpipe to be made, ive had the custom boost pipes made to match up to the standard pipe work so that isn't an issue, in the next few weeks (hopefully) the gtb2260vklr will be fully fitted and ready for the few days ive booked at the mappers. Stay tuned guys i will take lots of pictures and keep you informed. Anyone is more then welcome to come assist on the installation.

Sent from my SM-G900F using Tapatalk
 
Evening every everyone sorry for the lack/no recent updates to the VKLR project ive been soo busy lately.

Ive booked the 21st and 22nd of this month off to start and fit the turbo.

I have got everything planned so hopefully everything should come together just fine.

To start with is removing of the old unit (that maybe up for sale) and fitting the vklr in its place,

thats the easy bit the next part is to T into a hot and a cold coolent pipe ive decided to use the old egr cooler pipework for this,

Next is fitting the stainless braided water and oil hoses.

Then get the car on my mates trailer and take the car to have the custom downpipe made also have the intercooler pipwork adjusted to match up to the vklr.

After all that is done its the first run of the car home to change the injectors and then run the car for a few days before having the map adjusted to get the full potential out of the hefty GTB2260VKLR.

Stay tuned guys and feel free to comment on parts you think i have missed.

(apologies for incorrect punctuation)
 
You must log in or register to reply here.

Similar threads

mjstokes85
Incorrect Info On Wikipedia Regarding Ibiza 6L
Replies
2
Views
535
Tell
Tell
Sound system confusion
Replies
4
Views
395
Whiff3081
LM440 IS38 Ibiza cupra 1.8 TSI
Replies
4
Views
1K
Jensen
Syphon
CUPRA Leon VZ TCR and CUPRA Leon VZ unvelied with 325PS and 420Nm
Replies
17
Views
2K
tracktoy
tracktoy
Jordan_Manning
Seat Ibiza 6J speaker wire colours
Replies
0
Views
252
Jordan_Manning
Jordan_Manning
Top Bottom
Back