Laguna splitter

[dervpower]

Need to get some self tapping screws now!

 

[oneofthetwins]

got any pictures of he laguna splitter on a mk4 or just a pic of it?

 

[dervpower]

looking at the pre facelift bumper i'm not sure how it will work. Hope to get some pics tonight!

 

[Gooner_Mike]

looking at the pre facelift bumper i'm not sure how it will work. Hope to get some pics tonight!

Run it along the lip of the plastic bit under the bumper (if this makes sense.) When I fitted the LCR splitter to mine, I used this as a guide to keep it straight.

 

[knackerdecobre]

You could take the valance off and screw it straight into the bumper

 

[dervpower]

both options i have looked at lol. Cheers guys!

 

[DEAN0]

You could take the valance off and screw it straight into the bumper

Only problem I can see doing it this way is that if you catch it on anything it will take the bumper with it.

 

[dervpower]

Tried to fit today, needs cutting down in both width and length, so thats first. But also not even sure it will look that good...

 

[will7291]

hmm doesnt look to easy, lots of people with corsas have done it and they've had to cut it in the middle and take a bit off

 

[oneofthetwins]

Tried to fit today, needs cutting down in both width and length, so thats first. But also not even sure it will look that good...

thats no use think i prefer the lcr splitter see what its like when its on

 

[ashgtiturbo]

you can get the earlier laguna one without the holes...then you could fit it centrally and trim the sides off. and there are thicker bits on the top of the splitter that you can use to screw into to make it more stable.
They take a lot of abuse too and flex loads so un likely to rip off unless you are very un lucky.