Nice mate what boost you running ? When I had my amd remap is was going up to 2 bar boost , now since r tech it is 1.7 , it is weird how they can make more power with less boost!
-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
Lee's forged cupra mk2
- Thread starter Leeoncupra
- Start date
1.5bar mate on stage 2
Rtech dynod at 323 but i had a forge twintake and a corroded ac rad iv since put a revo intake on and done a ac delete. I recon its running more but have no graph to back it up deffo feels alot stronger
forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
Nice when you took ac out was it a difficult job ? Did you follow any guides at all? I am wanting to take mine out and expose the intercooler and paint it a nice lime green!
The pipe on it was severed so no gas in it so i just unbolted it and cut the pipes out. Looking to get the shorter aux belt and remove the compresser .
forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
Just go wellycooler! This should be a straight fit and use S3 pipes to join cooler to original pipework as it's basically a cheap Chinese s3 cooler. But it doesn't so this is a poorly designed cooler
Last edited:
Aha dont...iv been reading up on them all morning. Is a shame to waste the other cooler though as with the darkside hoses it owes me 300quid lol.
forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
Darkside hoses where 95 inc vat and postage..the eBay hoses fitted better aswell the darkside needed cutting. Very disappointed
forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
Haha I bet you end up fitting a wellycooler eventually and ditching the cheap tat Chinese knockoff s3 cooler lol
A few of these issues with the Chinese s3 coolers.
Sent from my Pixel 2 using Tapatalk
Here’s my graph looks like it pulls good all the way to the redline
, I’m sure these intercoolers are fine if you just add oversized hoses
, I’m sure these intercoolers are fine if you just add oversized hoses
(Not allows to quote yet. As only got 14 posts)
Yeah it took me a long time to decide. But I’m happy with the set up. Good ride quality and decent drop without scraping. Having the new springs and shocks really transforms the car.
Yeah it took me a long time to decide. But I’m happy with the set up. Good ride quality and decent drop without scraping. Having the new springs and shocks really transforms the car.
I want my graph to look like that lol!Here’s my graph looks like it pulls good all the way to the redline
, I’m sure these intercoolers are fine if you just add oversized hoses
Got to put tuning my car onhold at the moment as ive just chopped in my mrs focus zetec s 1.0 and bought her a focus st diesel so il need to do some visual mods on that first to make it look better as our daily driver lol
forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
That’s a shame mate , get the intercooler on , well worth it , just had a race with a45 and couldn’t even live with me in a straight line looks like he put his car in reverse!
As i have 2 hoses already i may get away with just a joiner and cut the hoses in half and just fit the joiner in the middle? Same thing isnt itPicture of pipe if you still want them Lol
Yeah well happy with those pics really cleared it up for me
forged engine,revo intake,3" TBE r tech stage 2 -323bhp 333ftlb build thead: http://www.seatcupra.net/forums/showthread.php?t=440348
Similar threads
