Looking for some hubcentric spacers

[speedsix]

For the rear of my LCR, ~15mm I reckon. Need to be decent quality but not silly money.

Any suggestions on brand and a link to somewhere that stocks them would be good. I have searched but there seems to be a lot of conflicting information. Ideas where to source longer bolts/lockers would be appreciated aswell.


Cheers

 

[BCM]

Jabba supplied my lil' bros on his Beeza
Sure Bill @ Barger5 does 'um too!

 

[Andi]

Got my 15mm H&R rear spacers off bill.

 

[lc_allan]

H&R probably make the best ones.

However I got some 20mm ones from Demon Tweeks when they were fitting my wheels. They are were S-Racing ones and I had a chance to look at them before and they were again well made.

http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=ROAD&pcode=AILDR010

Not sure about the longer bolts as I had mine converted to studs and nuts for the wheels/spacers and Demon Tweeks sorted it out.

 

[G2232]

does anyone know what size bolts would be needed for 15mm spacers and where to get them?
As just aquired some by pure chance but need to get some bolts

 

[probee]

I was looking a while ago and found these to be quite reasonable

http://www.europerformance.co.uk/pa...seatleon&manufacturer=hrwheels&sub_category=1

also gets around the problem of new bolts.

EDIT: maybe you only get bolts with 20mm

 

[G2232]

i have thought in the past if something like this esixted but i just dont feel confident with something like this as its going to be putting a lot of strain on very little material

 

[BCM]

Its been done tones of times mate, i don't know of any problems, they ain't nice to drive with on the front tho!
Tones of the Ibiza boys run them on the rear, bout 15mm each side!

 

[probee]

i think you'd be surprised how strong they are

 

[G2232]

I know they are probably easily up to the job its just that i work in a job where i do a lot of calculations on forces exerted on bolts so i'm always very concious of that. lol.

I've already got the 15mm spacers anyway so they dont help me that much so im just after getting some bolts and what size i need

 

[Ruddmeister]

Forge do spacers, I had 10mm spacers from them on my old LCR to allow me to fit RS6 style alloys

For the rear of my LCR, ~15mm

Can I ask why 15mm on the rear?

 

[CupraCai]

Hey Guys,

If you were to space the rear wheels out 15mm each side then wouldn't you affect the wear on the tyres (i.e. the tyres would then wear on the inside quicker)? Does anyone have a pic of their car with the rear wheels spaced 15mm?

Thanks

 

[jhono]

i ordered a set yesterday from badger 5 ,for my lcr 15 mm on the back 10 mm on the front havin talked to bill about this set up i am confident in the spacers and bolts he will supply,and i think most of the guys on this forum who know him would agree he knows what he,s talkin about.

 

[UncleFester]

16mm rear and 10mm fronts.