-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
Matt's Red Ibiza FR TDI on RHs, with added plywood and plastic :)
- Thread starter FR_MATT
- Start date
im trying...not a lot of interest in mine at the moment..
yet when I was after some I couldn't find any for love nor money..
And so the photo whoring from SpringFest begins...
A top up of my cleaning gear from the amazing Easter deals at Autobrite Direct:
Managed to get quick polish of the roof, bonnet and boot in but couldn't do too much with the clouds looming, then it rained before I could get any wax on
Attempting to get some wax on in lol:
Springfest! Really good day sun came out and everything
Few of my phone snaps after a good clean when we arrived:
Amused me, the reg more than the sticker:
Stolen pics (Thanks!)
Ibiza owners club/ SSS- Tills
Ibiza owners club - Gtikezz
Performance Seat Editor - Andy aka Ibiza owners club - bizaboy
Video still:
Which led to this:
3rd on the handling circuit on my 3rd run after getting 5th on my 2nd run Wished I'd had a go earlier in the day to see how much difference putting my RARB on stiff and removing the rear seats, spare wheel and boot full of cleaning products would have made lol
A top up of my cleaning gear from the amazing Easter deals at Autobrite Direct:
Managed to get quick polish of the roof, bonnet and boot in but couldn't do too much with the clouds looming, then it rained before I could get any wax on
Attempting to get some wax on in lol:
Springfest! Really good day sun came out and everything
Few of my phone snaps after a good clean when we arrived:
Amused me, the reg more than the sticker:
Stolen pics (Thanks!)
Ibiza owners club/ SSS- Tills
Ibiza owners club - Gtikezz
Performance Seat Editor - Andy aka Ibiza owners club - bizaboy
Video still:
Which led to this:
3rd on the handling circuit on my 3rd run after getting 5th on my 2nd run
Wished I'd had a go earlier in the day to see how much difference putting my RARB on stiff and removing the rear seats, spare wheel and boot full of cleaning products would have made lol
Thanks, I got a Canon EOS 600D with the standard 18-55mm lens, I'm enjoying it and it's not been too difficult to get use to having used my little brothers 550d a few times before
Haha I saw it outside before I went in, I was like is that beast outside available lol woman was like yes we also have another one let me find what colour it is... I'm thinking yellow yellow yellow.. but it was white
Anyway:
Managed to do some arch rolling a weekend or two ago, couldn't find my c spanner on the day though
so didn't get chance to lower it more:
Went to the Ashby Folville Car and Bike Meet, really wide selection of cars everything from modded jap stuff, hot rods, classics and few supercars:
Grabbed an entry to countryside themed picture of the month for another forum on the way home:
Last edited:
It's a preventative thing so it doesn't run any difference as such, I used a breather filter as after spending hours cleaning the intake manifold I didn't want their to be any chance of it getting all caked up again. There's also more risk plumbing it back in as you have to be careful what you use as a baffle as this can be sucked into the turbo intake pipe.
If you baffle the can well enough there shouldn't be much vapour coming out of the breather, if it's cold and you have no baffles it looks a bit alarming lol! It also won't catch much/anything without some type of baffle.
I've done similar to this in mine (but with a plastic pipe instead of the copper one shown):
Well I was planning of making a wire cage inside the catch can made from stainless steel wire stuff we use at work but like I said I was planning of sending it back to the inlet I wanted to know what's te diffrance between sendin it back to the inlet or sending it to a filter
Similar threads
