-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
mk3 ibiza cupra GT28rs back yard build!
- Thread starter mc funbot
- Start date
Cupra_Amy
Guest
the 3" turbo back system is on and going well me my brother an pete at PTR exhaust had a saturday of fun getting this system built! (i will do a write up about ptr exhaust soon)
at the moment i have a straight through systm with a 5x3" oval it looks sweeeeet..
got there at 10 am
cuppa coffee an a pasty and we started miltek off (this system needs a new home) CHEAP!!
started with the rear box got that all cut an put together!
at the moment i have a straight through systm with a 5x3" oval it looks sweeeeet..
got there at 10 am
cuppa coffee an a pasty and we started miltek off (this system needs a new home) CHEAP!!
started with the rear box got that all cut an put together!
got the 5x3" tip sorted an ready to go on
hangers on an under the car.
over the back axel with a little tinkering i have plenty of room for 3" no problem
that done was on to the middle section from down pipe to 1st bed nice an simple 2 flages an a huge bit of pipe..
with this pipe an and having no car the 2nd lamda will normaly put up a code we are trying little contraption at the mo thats puts the lamda back so the reading should be the same as when you have your cat in an will go on any exhaust! it just screws in an nut tightens it up any angle you like
hangers on an under the car.
over the back axel with a little tinkering i have plenty of room for 3" no problem
that done was on to the middle section from down pipe to 1st bed nice an simple 2 flages an a huge bit of pipe..
with this pipe an and having no car the 2nd lamda will normaly put up a code we are trying little contraption at the mo thats puts the lamda back so the reading should be the same as when you have your cat in an will go on any exhaust! it just screws in an nut tightens it up any angle you like
that all done then to the hard part of getting the bends sorted an making sure nothing knocked.
this is me after making my 1st ever slip joint..
my brother an pete have some huge skills in welding..
this is me after making my 1st ever slip joint..
my brother an pete have some huge skills in welding..
everything welded up polished an cleaned and ready to be heat wrapped few pics of the system
this guys is good friend of myn an id love to help him in anyway to show of his amazing work if you wont to get work dont by him call and chat or drop me a message he will build you anything from manifolds to exhausts motor bike stuff decats anything you can think of he wil build it.. there are not many companys out there that can build EVERYTHING them self. just say where an who said about ptr an he will sort you out im martyn cooper..
http://www.facebook.com/#!/ptrexhausts
this guys is good friend of myn an id love to help him in anyway to show of his amazing work if you wont to get work dont by him call and chat or drop me a message he will build you anything from manifolds to exhausts motor bike stuff decats anything you can think of he wil build it.. there are not many companys out there that can build EVERYTHING them self. just say where an who said about ptr an he will sort you out im martyn cooper..
http://www.facebook.com/#!/ptrexhausts
sh*t hot coops!! that exhaust build looks the nuts!! cant wait to hear what she sounds like.....top job as always!!
Similar threads
