mk4 tdi130 sport, Wheel colour change, stance, polybushes. UD Rolling shots

[beefa_gaz]

Basically i bought an ibiza tdi 130, bought it totally boggo standard.

only had it 2 months or so, so far the cars had.....

Nice fresh sachs OE clutch and dual mass fly.

Evolution Chips Remap, Allard EGR blank, K&N panel Filter, Cupra front lower arm bushes, some nice solid ones, FK AK street coilies with shorter frop links, 6k HID's, some H&R hub adaptors 20mm all round, but thinking of 25's for the rear! and Some freshly furb'd BBS RC's, 7.5 inch wide fronts, 8.5 rears, runing 195/40/17's front and 205/40/17 rears.

Need to take the front helper springs out this week and drop the front more and wind the rear down too.

Loving it so far though!! Next up will be a nice big front mount and an exhaust. then after christmas some cupra R bumpers, seat sport skirts, paint and a re-trim with a nice double din headunit and some other nice touches.

Stanadard wheels back on for december though and wind the coilies up for some track time at oulton park

will be loads more pics as am going along, all comments are welcome cheers!

 

[mazzerati]

both the bora and ibiza are wicked man
good effort

 

[Alex 17]

Still not convinced by bbs splits on ibizas..

 

[mazzerati]

mm they dont suit polished lips do they tbh.

 

[beefa_gaz]

i think bit lower will help ALOT! looks wise, the cupra bumpers will make the wheels look a little more at home too imo. cheers for the comment!!

 

[beefa_gaz]

mm they dont suit polished lips do they tbh.

diamond cut, not polished lol

 

[Alex 17]

I'd love too try a set on mine just too see what they would look like with cupra bumpers and slammed on its ass! , I just dont they they work with the polished lip ,Look out of place, but maybe its just not been done right yet! Needs dish badly! Im sure you'll turn it into a nice looker in no time bud

 

[beefa_gaz]

thats the main reason there on mate as i dont think many if anybody has done the bbs split thing right on a beefa, i'd LOVE a set of RS's but am not paying rs money being deadly honest and realistic. the roads in liverpool are awful.

it will turn into a nice car looks so much nicer than the day i got it, main thing is it drives absolutely mint, goes really well, so can just crackm on with spending money on nice bits. will be alot lower by the weekend and will dig out some old 5mm spacers to see f its wort gettig some 25 hubi's for the rear as opposed to 20mm

 

[Wilber]

Would look better if they were an inch smaller. I dont like 17s on prefacelifts, makes em look like moon buggys. Set of facelift bumpers would set that of a lot better.

 

[gezmeister]

Would look better if they were an inch smaller. I dont like 17s on prefacelifts, makes em look like moon buggys. Set of facelift bumpers would set that of a lot better.

Agreed, wheels are awesome but need to be smaller imho. Nice work though, well played. Look forward to seeing your future mods

 

[beefa_gaz]

Would look better if they were an inch smaller. I dont like 17s on prefacelifts, makes em look like moon buggys. Set of facelift bumpers would set that of a lot better.

i was on the other oppinion that 16's looked too small lol am sure some bumpers will sort it right out they wont be on till after christmas though as not gonna get it painted before as its a daily and dont wanna ruin nice fresh paint.

cheers chaps!!

 

[knackerdecobre]

16's are THE size for Mk4's

 

[beefa_gaz]

Cupra bushes are in, difference is unreal. off for 4 wheel allignment tonight and some more lows. front mount time in a couple of weeks too!

 

[wenman]

I really like this!
Looks good on the Rc's

 

[pjdj]

You getting it 4 wheel aligned then lowering it after?

 

[beefa_gaz]

no it got lowered last night, its getting alligned tonight. then will get alligned again when the 16's go back on and it gets raised up for oulton park track day early december

 

[beefa_gaz]

I really like this!
Looks good on the Rc's

cheers bud! should have some more pics over the weekend, one of the allard and a few more of it with lows, LED number plate and sideight bulbs en route too

 

[Amjad]

That is stunning, nice and subtle B)

 

[beefa_gaz]

cheers buddy!! i love the look of it! really do. just booked onto oulton park for the 11th december open pit. so the standard will be going back on with some sticky tyres and be getting aised up and alligned again. cant wait fo the day.

will get some pics of it as it is at the mo silly low before the standard go on fo this trackday and for winter

 

[beefa_gaz]

Cupra R rear bumper will be here in a couple of weeks, possibly a front too just waiting to hear back.

312's with EBC discs and Redstuff pads getting fitted tomorrow too.