the bear1986

Active Member
Jul 25, 2007
323
0
norwich
hi guys i'v just got my o3 pd tdi 130bhp ibiza last week and iv just had the revo remap done and it kicks ass but what else can i get done as the guys who did the remap said i shouldn't get an air induction kit as it cause's to many problems with the air reader is this true and can anyone help me on what safe mods i can do cheers???
 
hi mate get a pd160 intake and a green cotton filter i have been running that setup since i got my car and have never had a problem also i would say get a miltek exhaust sounds nice and helps engine breath a bit better, other than that next mod is big turbo!! well worth it mate!!
 
If you dont mind me asking how much was the revo remap? What figures are you pushing out now? bhp? torque?
 
Air flow meters are one of the most common problems with any VAG engine, standard or mapped, standard filter or after market. I'd definately recommend at least doing a replacement panel filter to allow for a lot better air flow.
 
hi guys the revo cost me £468.53 inc vat and it's putting ot 168bhp and 280lb ft of tourqe thats what theguys who set it all up told me but when i get a chance to im gonna put it on the dyno and get the prober readings.

so asking the same question again what engine mods can i get for 130 tdi 2003 reg ibiza which wont **** my engine up? also do anyone know where i can get a real cupra r body kit and the wheels?

does anyone know where i can get a good miltek exhaust boughht and fitted close to norwich?

what kind of panel filter should i get?
sorry about all the questions but i would rather do this right then do it wrong and screw me car up
 
Get the PD160 air intake and a green cotton filter

JBS Auto design can sort you out with these. They are in the sponsors section I think.

this helps the turbo spool up faster and generally helps the car breath better

Mike
 
Hi mate, has the remap transformed the performance a lot?? What was your mpg before and after th remap??
 
how much is the filter mate?

yeah the performance is much better i can do 130 and it still stays just under the 3000rpm so the turbo keeps kicking in and the mpg has only changed a little bit but not much unless i thrash it and then yes the mpg is rubbish. have you had the remap done or thinking about it getting it done
 
Last edited:
how much is the filter mate?

yeah the performance is much better i can do 130 and it still stays just under the 3000rpm so the turbo keeps kicking in and the mpg has only changed a little bit but not much unless i thrash it and then yes the mpg is rubbish. have you had the remap done or thing about it getting it done

When I got the filter and intake I think it was about £70 all in.

Dead easy to fit. just need a philips screwdriver.

10 mins job max. (including making a cuppa tea)

Mike
 
The PD160 intake is just the intake from a cupra. it is a bit wider thus allows more air through.

You could buy one from the dealership - it comes in 2 parts.

I don't have a pic of it unfortunately.

Mike
 
how much is the filter mate?

yeah the performance is much better i can do 130 and it still stays just under the 3000rpm so the turbo keeps kicking in and the mpg has only changed a little bit but not much unless i thrash it and then yes the mpg is rubbish. have you had the remap done or thinking about it getting it done


Its rubbish?? What sort of figures are you getting?? I should be getting a sport 130 tdi in a few months just seeing what mods are gonna be best!
 
well when i was thrashing the car on the dual carriage way and the mpg went down to 32.6mpg so it's not bad but wheni drove it normal i can get 49 - 51 mpg doing 65 - 70mph it just depends on how hard you drive mate.

what year is yours mate? and i don't have any mods thats the problem i'v been told not to get any as this is as good as it can get. i didn't believe them so thats why im asking for help on here.
 
USe the search guys!!!!!

This topic is covered daily.

There are sticky's at the top of the mk4 section covering basic mods.

312mm brakes
FMIC
Cupra intake
Suspension
Clutches
mufflerectomy.
custom remap

you will see 180ish bhp, 300 lb/ft torque.
a 14.7ish 1/4 mile time,
0-60 in 6.7ish
0-100 in late 16ish
135+mph [true speed, not speedo]