dodgemnz
Guest
Hi all,
Im from New Zealand and im trying to fix a Cordoba 1.6 8V with an imobiliser problem.
The car has no central locking from what i can tell. We dont have the original security key only a new blank key that works the locks.
The engine runs for aprox 3 secs then turns off and the engine ecu fault codes say it was disabled and the immobiliser codes says it cant read the key or has a weak signal.
I have no idea what happened to the original key for this car as i got it in this condition from a garage that was disposing of it on behalf of the owner!
The plan... I have a coded key and matching immobiliser box from under the dash panel of the exact same model of car and also the column switch with pickup coil.
Question ... Can i fit the immobiliser ecu and use the key that matches it with out having to change anything else?
or... do I have to program the vin number or other id into the immobiliser to make it match. Im presuming this system is basic and there is no ecu in the instriments or no engine ecu changes required?
VIN: VSSZZZ6KZXR185xxx
immo p/n 6H0-953-257-A
immo id VWZ3Z0W2280722
(launch X431 scanner)
Cheers
Mike
Im from New Zealand and im trying to fix a Cordoba 1.6 8V with an imobiliser problem.
The car has no central locking from what i can tell. We dont have the original security key only a new blank key that works the locks.
The engine runs for aprox 3 secs then turns off and the engine ecu fault codes say it was disabled and the immobiliser codes says it cant read the key or has a weak signal.
I have no idea what happened to the original key for this car as i got it in this condition from a garage that was disposing of it on behalf of the owner!
The plan... I have a coded key and matching immobiliser box from under the dash panel of the exact same model of car and also the column switch with pickup coil.
Question ... Can i fit the immobiliser ecu and use the key that matches it with out having to change anything else?
or... do I have to program the vin number or other id into the immobiliser to make it match. Im presuming this system is basic and there is no ecu in the instriments or no engine ecu changes required?
VIN: VSSZZZ6KZXR185xxx
immo p/n 6H0-953-257-A
immo id VWZ3Z0W2280722
(launch X431 scanner)
Cheers
Mike