no engine management light

[cupra-gaz]

Hi all, recently bought a mk3 ibiza cupra and have become aware the engine management light is supposed to light up when ignition is on, which mine does not.
firstly i checked the fuses, then dismantled the dash as i was expecting a bulb missing only to find tiny leds.
the car is completely standard and had one lady owner so am doubting anything dodgey but am now at a loss.
anybody know of anything else i should check or what my next step should be?
ive serched but had no luck
thanks

 

[meltonlad]

mate ive got the same prob but on a mk2 tolly plus my seatbelt light dont work...

 

[gazcuprablk]

i have that problem now m8 i had the engine light working in my old cupra so im going to change the clocks from there into mine, also you stole my username which i use on other forums lol

 

[cupra-gaz]

some one must be able to point me in the right direction?
maybe vag-com test, would that tell me anything?

 

[meltonlad]

ive ran vagcom on mine but no fault codes come up for it..

 

[cupra-gaz]

oh ok, u got any other ideas what it could be?
cheers

 

[m0rk]

Bulb removed? Blown?

 

[gazcuprablk]

bulb removed most prob m8 some1 has done it to mine i would change the clocks but no1 has posted a reply into my post so im looking here for someone to say/show how to re-align them

 

[m0rk]

I'm pretty sure that your clocks are linked to your immo key... Not so easy to swap out as you have to recode the key (I think)

Check ross-tech for how to sync Immo2

 

[cupra-gaz]

their leds not bulbs so shouldnt blow, ive already had the clocks apart as i thought bulb blown/ removed. think its gotta go to an auto electrician, need that comfort light to come on lol.
thanks for your help though gents