Part numbers for OEM ST exhaust, 280 vs 290 vs 300 (FWD only, not 4WD)

[Brackett]

edit: I mean FWD versions only.

Hi, does anyone know the OEM part numbers for the ST exhaust across the 280, 290, and 300? I am trying to work out if the OEM exhaust is exactly the same on all 3 variants (ie. has the same part number). Thanks.

 

[Titchy]

Hi, does anyone know the OEM part numbers for the ST exhaust across the 280, 290, and 300? I am trying to work out if the OEM exhaust is exactly the same on all 3 variants (ie. has the same part number). Thanks.

Do you want assembly numbers? Or individual part no?

In a nutshell the 280 & (old)290 will be the same.
The 300 has the option for the haldex so that will be different, As the centre res has to allow for the driveshaft.
The new 290 has no centre but instead the gpf, so that will be a different part no.

However it would be safe to assume the back boxes have not changed....


Sent from my iPhone using Tapatalk

 

[Brackett]

Sorry, my fault, I wasn't clear (I will amend original post), I just meant the FWD versions.

So I meant are 280, 290, and 300 FWD versions all the same?

(basically, will a Milltek 280/290 fit a 300 ST FWD?)

 

[Damo H]

Sorry, my fault, I wasn't clear (I will amend original post), I just meant the FWD versions.

So I meant are 280, 290, and 300 FWD versions all the same?

(basically, will a Milltek 280/290 fit a 300 ST FWD?)

Short answer yes The internals maybe different, but the routing underneath is only different if its a 4drive, but you already know that.