porsche alloy wheels

[hughes86]

has anyone put a set of porsche alloy wheels on a leon? if so wot is required? as i am interested in putting some on. i have an 04 plate leon cupra tdi 150

 

[kenny-cupra]

you will need 5x100 to 5x130 adaptor for porsche rims , but be careful of what rims you buy you will need to check the ET of the wheels as some have hight ET another have low ET so ideally you are looking for wheels with a ET50+ so you can fit 20mm adaptors then the ET will be about 30

hope this helps
Cheers Kenny

 

[Stan 24v]

You should be able to fit some no probs mate, provided they are 5x100

 

[kenny-cupra]

You should be able to fit some no probs mate, provided they are 5x100

porsche rims only come in 5x130 if you go ahead with them , remember to add the cost of adaptors to the cost of the wheels

 

[Stan 24v]

Ah cool, wasnt sure what they were. have a look on the corrado and mkiv forums mate, plenty of info about them around.

 

[hughes86]

would i need replica wheels? and how much the adapters cost roughly?

 

[benjiwales]

http://www.venommotorsport.com/shop/index.html
http://www.rimstyle.com/
http://www.rennsport.co.uk/scripts/default.asp

All above sell adapters are about £150 for a set of 4

 

[kenny-cupra]

the best adapters out there is H&R as need to be care that the thread don't strip on some off the cheaper one