Ramair maxflow induction kit need help!

[Grat]

Hey folks is this the kit that people have on the lcr and will it fit ok???

http://cgi.ebay.co.uk/ws/eBayISAPI....27270&_sacat=See-All-Categories&_fvi=1&_rdc=1

Cheers Dave

 

[gb]

why not try the smoothed airbox and greencoton panel filter

 

[Grat]

i fancy the induction to be honest mate fancy the grunting noise

 

[adam cupra 20vt]

If you want noise your better off with a filter without a shield.

 

[LEE69]

That won't fit an LCR as it doesn't go to 80mm.

 

[james walker]

but if you use a 80mm to 70mm reducer or 75mm as it says then it will fit fine.

cheap that though, also arent the cai closed type proven to be restrictive on 20vt? i.e bmc

 

[wayne lcr]

i run bmc and its better than any other filter ive had and its says wen you buy it 8 10 bhp increase and theres mixed feelings about filters its what you want at the end of the day

 

[james walker]

8-10 bhp increase on filters is a lottery in itself tbh. maybe filter and high flow cat and dp may release 10bhp.

imho a closed induction kit isnt warranted on turbocharged engines, n/a maybe

id go for the largest surfce are open cone you can find. i wouldnt go for the ram air imho, but its my opinion.

 

[Grat]

where would i get the 75mm to 80mm reducer from mate and how much? Cheers

 

[adam cupra 20vt]

This would do

http://cgi.ebay.co.uk/BLACK-80mm-76...arts_Vehicles_CarParts_SM?hash=item53deb9eba3

http://cgi.ebay.co.uk/STRAIGHT-REDU...arts_Vehicles_CarParts_SM?hash=item587f330902

Prob need a coupler to.

 

[Grat]

sorry to be sound stupid mate but where would i get the coupler from aswel

 

[Grat]

what will i need a 80mm coupler or 76 or both? cheers

 

[andytaylor1980]

If your after a grunting noise the ramair wont give you that, it sounds like more of a woosh and darth vader with a cold. I bought one of a member on here but like you i wanted grunt so i just removed my bonnet cover and fitted a jetex cone filter and that does the job for me

 

[GlanzaV]

Had one on my Mk3 Ibiza Cupra - seemed ok, never got a whole load of induction noise.

 

[Grat]

i might go for the mahooosive jettex one everybody goes for then do you need other bits aswel to fit it if so what? Many thanks

 

[andytaylor1980]

i might go for the mahooosive jettex one everybody goes for then do you need other bits aswel to fit it if so what? Many thanks

I just fitted mine straight onto my MAF and secured it with some metal flex to stop it bouncing about, some people use a silicone extention but mine has been fine so far.

If you still want a Ramair i could put mine in the for sale section if you wanna PM me

 

[Grat]

I think im going to go for the mahoosive jettex cone to be honest now mate. Think i will order one tomorrow after ive had my new tyres fitted 166 quid for a pair of toyo proxie t1r's delivered bargain if you ask me?! Did you just jubilee it on to the maf then and use some ally flex up to it? Going to get something made at work i think to fit to the back of the grill with a spigot to conect the flex i think

 

[andytaylor1980]

It came with a JC already fitted onto it so yeah just a matter on pushing it on and tightening it up, im sure i saw a jetex in the for sale section too mate so have a butchers, just i think jetex have been out of stock for a while due to the sudden influx of orders due to SCN members

 

[Grat]

I think im going to go for the mahoosive jettex cone to be honest now mate. Think i will order one tomorrow after ive had my new tyres fitted 166 quid for a pair of toyo proxie t1r's delivered bargain if you ask me?! Did you just jubilee it on to the maf then and use some ally flex up to it? Going to get something made at work i think to fit to the back of the grill with a spigot to conect the flex i think