Retrofitting the steering wheel

[ababic64]

Hi guys,

I bought the VZ 310 brand new from the dealer, but in my country, for some reason, they don't come with a steering wheel that has start/stop and drive mode buttons on it. Instead, I got the non-vz wheel with a start-stop button near the transmission.

The car has been a joy so far and I would like to reward it with the upgrade. Has anyone done this and knows which parts are needed?


Thanks

 

[East Yorkshire Retrofits]

Steering wheel
stalks with slipring
Wiring changes
software changes

 

[universaluser]

Hi everyone. I have Formentor without Travel Assist but I have Safety and Driving Pack L (Trafic Sign recognition, blind spot, lane assist. )Can I replace my steering wheel with that one, and make some coding to activate Travel Assist? Also can I enable that buttons with Start Engine and Drive Modes?

 

[ababic64]

Steering wheel
stalks with slipring
Wiring changes
software changes

Thanks! Any chance you have part numbers? What about the Traction control button that would take place instead of the current start/stop?

 

[Pepcox]

Hi everyone. I have Formentor without Travel Assist but I have Safety and Driving Pack L (Trafic Sign recognition, blind spot, lane assist. )Can I replace my steering wheel with that one, and make some coding to activate Travel Assist? Also can I enable that buttons with Start Engine and Drive Modes?

Yes you can code the travel assist if you will change the steering wheel with capacitive sensor in it.
I can provide coding if you want.

 

[cairus]

Coding is even available here

OBD Modifications

Imagine it like that: Travel assist is lvl 2 with capacitive steering wheel, acc and staying in the middle of the lane. adaptative lane guidance is lvl 1 with acc, staying in the middle of the lane but without capacitive steering wheel. So you have to ever so slightly move the wheel or you get...

www.seatcupra.net

 

[jeyak]

Steering wheel
stalks with slipring
Wiring changes
software changes

Hello,

@East Yorkshire Retrofits

I have the Steering wheel, stalks with slipring but what are the sofware change ?
Can be coded with something like OBDEleven ?
for the wiring change, I will try to do it but il will try to keep the old connector for the slipring and try to make an adapter (in case a need to go back)

I would like to come to you guys (at East Yorkshire Retrofits) to do these things but I live in France ... and that is really difficult for me

Thanks in advance