revo stg 1 18 psi

[cupra drew]

hi guys just fitted my boost gauge and am only peeking at 18 psi on revo stg 1 i thought it was supposed 2 be 21 psi is this anything to worry about

 

[M87NER]

i dont know much on the revo side but might be few things.

some others revo stg 1 may only boost 18psi

how accurate is your gauge, where is it t'd from?

would doubt a boost leak but ya never know,

 

[cupra drew]

got the gauge of my m8 its an autogauge the car runs perfect just seems a bit low

 

[cus]

mine peaks at 18psi with an APR remap. i dont know about the revo though

 

[Damoegan]

You can adjust your boost on REVO maps with a SPS mate. Its prob set to a medium setting.

Try asking in the REVO section.

 

[cupra drew]

any ideas on what the best setting is

 

[Damoegan]

No, sorry mate. I dont run REVO.

Like I said, post the question in the REVO section and someone will give you the right answer.

 

[__B3NNY__]

IIRC on a standard car its around HB6 T6.

 

[cupra drew]

that means nothin to me mate its nt standard tho

 

[cupra drew]

heres the gauge

[/IMG]

 

[__B3NNY__]

Revo settings for a standard`ish car are IIRC High Boost 6 Timing 6 - using the new SPS.

What mods do you have?

Idealy settings should be chaged in accordance with logging.

 

[PhilW]

Log it on vag com if your worried about it.

 

[cupra drew]

ive got fmic blueflame d/p and cat supersprint cat back forge tip green panel filter n249bypass forge split-r dv

 

[__B3NNY__]

With those mods if the settings are correct you should see ~21psi with stg1 - i did with near enough the same mods.

Either your settings are low or you have a leak, as Phil said proberly best to run a few logs on vag-com.

 

[cupra drew]

cheers lads dont no any 1 with vag-com tho or how to use it lol

 

[__B3NNY__]

Post a help thread up in the vag-com section to see if theres anybody in your area

 

[cupra drew]

cheers mate will do

 

[cupra drew]

any 1 got vag com around my area

 

[Danjw]

My motors roughly the same spec as yours mate and im only seeing 18-19 psi on my autogauge. No problems with the car either, only had the boost gauge in for 2 weeks and i expected it to be running around 21psi aswell.

 

[Myki da Pyki]

Where did you plumb the boost gauge into aswel?