- Status
I only have the coilpacks under there, wouldn't think there was room to get anything else under there.
My camera is a Casio Exilim 7.2 megapixel, great camera.
Many thanks for all the kind comments, I'll be at Star this Sunday for the RR day/meet if anyone wants to look around it!
Many thanks for all the kind comments, I'll be at Star this Sunday for the RR day/meet if anyone wants to look around it!
oh i'll be havin a look rob don't you worry, i dont know if anyone has mentioned it to songman though. cant wait now. woohoo
My camera is a Casio Exilim 7.2 megapixel, great camera.
Many thanks for all the kind comments, I'll be at Star this Sunday for the RR day/meet if anyone wants to look around it!
Nice I have the Exilim 10.1mp
Howd you get the blurring? Manual focus? Looking forward to meeting you at Star Rob. 
:
Here's the latest pics of my engine bay, I sent some stuff off to be chrome-plated over the winter, finally it arrived back so I got it fitted, 3 parts in all - cam cover, upper charge pipe made for me by Pro Alloy to my drawing and an intake manifold bracket.
Overview:
http://i112.photobucket.com/albums/n191/robd67/mar0801.jpg
Cam cover:
http://i112.photobucket.com/albums/n191/robd67/mar0802.jpg
Charge pipe:
http://i112.photobucket.com/albums/n191/robd67/mar0803.jpg
K&N Apollo with 90mm feed, vacuum distribution block, Forge oil separator tank (modified Pulsar GTi-R tank) ...
http://i112.photobucket.com/albums/n191/robd67/mar0804.jpg
Going to send the Forge tank off to be chromed too - there is a HUGE difference between chrome and polished alloy. Tank will be chromed before the F&M show in the summer!
Overview:
http://i112.photobucket.com/albums/n191/robd67/mar0801.jpg
Cam cover:
http://i112.photobucket.com/albums/n191/robd67/mar0802.jpg
Charge pipe:
http://i112.photobucket.com/albums/n191/robd67/mar0803.jpg
K&N Apollo with 90mm feed, vacuum distribution block, Forge oil separator tank (modified Pulsar GTi-R tank) ...
http://i112.photobucket.com/albums/n191/robd67/mar0804.jpg
Going to send the Forge tank off to be chromed too - there is a HUGE difference between chrome and polished alloy. Tank will be chromed before the F&M show in the summer!
Looking stunning as usual!
It must be so much easier to clean chromed parts. Stock cam cover is no fun to try to keep clean.
It must be so much easier to clean chromed parts. Stock cam cover is no fun to try to keep clean.
Yes, SO much easier than polished, just wipe clean or a very light polish with some Silvo wadding. Costs more to have parts chromed but is alot easier to maintain the finish.
LCR-Chick
Guest
Always looking very special as per usual.
Changed your inbred pipe (miss coloured one) yet?
Changed your inbred pipe (miss coloured one) yet?
Last edited:
M1 20VT
Guest
Ok - I wasn't happy with the Piper 4" slashcut tailpipe, it was too short and didn't look right in the bumper cutout. So rather than change the whole exhaust again, I contacted a nearby firm called 'Stainless Creations' who make just about anything, but mainly custom exhausts. I found them by looking around Yell.com. They are based in Falkirk, a 20 minute drive from me.
http://www.stainless-creations.co.uk/
I went out this morning, they agreed that the tailpipe was too short, so they brought out some tailpipes and we agreed on a large oval which fitted the cutout perfectly. They offered to do the job right there and then, so I agreed and they've done a first-class job.
http://i112.photobucket.com/albums/n191/robd67/oval1.jpg
http://i112.photobucket.com/albums/n191/robd67/oval2.jpg
They tacked it on and asked me to check it looked ok before welding it up - end result is the look and sound are both perfect, it's a little quieter inside the car now, probably due to being slightly longer and differently shaped, but for me it's perfect.
Very friendly and helpful guys, good to deal with, happy to recommend them to anyone. I'm going back next month to have them make up some one-off intercooler pipes for my setup, to get rid of most of the silicone bends.
http://www.stainless-creations.co.uk/
I went out this morning, they agreed that the tailpipe was too short, so they brought out some tailpipes and we agreed on a large oval which fitted the cutout perfectly. They offered to do the job right there and then, so I agreed and they've done a first-class job.
http://i112.photobucket.com/albums/n191/robd67/oval1.jpg
http://i112.photobucket.com/albums/n191/robd67/oval2.jpg
They tacked it on and asked me to check it looked ok before welding it up - end result is the look and sound are both perfect, it's a little quieter inside the car now, probably due to being slightly longer and differently shaped, but for me it's perfect.
Very friendly and helpful guys, good to deal with, happy to recommend them to anyone. I'm going back next month to have them make up some one-off intercooler pipes for my setup, to get rid of most of the silicone bends.
- Status
Similar threads
