-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
any 
Yeh mine were that length to, the guy your buying them off should machine them to fit. Are they off ebay? whos the seller?
Yeh thats the same people i bought mine off, highly reccomended! They machined mine free of charge. Good luck!
i think so its about that or 16mm.... just had a scan through my ebay folder (40 pages) and onlt found his responce he said yep fine bacikly...i just put my 5mm eibech ones on and i must say superb...
Last edited:
Mines not a cupra lol 
and i measured mine at 17mm so it could well have been 18 depending on the amount of rust!
and i measured mine at 17mm so it could well have been 18 depending on the amount of rust!Yeah longer than 15mm only had a crappy B&Q tape measure but deffintly longer then that
i had my wheels off at the weekend to fit my new spacers and found that i had been sent the wrong ones they were for an audi.gave the spiggot a quick measure while i was there so that i could let people in here know that its 14-15mm thats on an fr 1.8t.
i had asked this question before and someone told me it was 14-15mm i can now confirm this. my replacement spacers are now in the post
wasnt all bad though i got all my wheels off and gave them 3 coats of zaino, that should keep them well protected for the next couple of months providing i stay away from them nasty kerbs
.gave the spiggot a quick measure while i was there so that i could let people in here know that its 14-15mm thats on an fr 1.8t.i had asked this question before and someone told me it was 14-15mm i can now confirm this. my replacement spacers are now in the post
wasnt all bad though i got all my wheels off and gave them 3 coats of zaino
, that should keep them well protected for the next couple of months providing i stay away from them nasty kerbs
The spigot length varies. not much but it does. Thats why the 15mm spacers wouldnt fit on mine. Get them from AC Services in Bridgwater. Well recommended.
i bought mine from a diffrent seller here VVV
http://cgi.ebay.co.uk/AUDI-VW-alloy...yZ122154QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
these had to be knocked on with a wooden block and club hammer but they are SPOT ON! guy sells longer bolts too!
http://cgi.ebay.co.uk/AUDI-VW-alloy...yZ122154QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
these had to be knocked on with a wooden block and club hammer but they are SPOT ON! guy sells longer bolts too!
Mines not a cupra lol
Not alot of rust the cars only 6 months old lol and only on 3500miles
just measured mine today (only took 5 minutes) and for a 52 pd130 sport it was 16mm
maybe we should all do it make a list or something cos everyone's buying these
maybe we should all do it make a list or something cos everyone's buying these
everyone says different things tho.. Add to the list of what car type and what lenth there spigot is etc...
yarp!
if we get people with the same models coming back with different lengths, then we worry right?
Similar threads
