Stuck!

[Phillips1795]

Hello!

Hope someone is able to shed some light. Im trying to sync my key fob to the car but the CCM stores a value of the old key fob even after a reset through VCDS.

Having tried several fobs including the original I've come up blank, spending a good few hours trying.

The CCM part number it 1C0 959 799 F from a 1M Seat Toledo

Have to keep clearing fault code 00179 (Incorrect Key Programming) after I try syncing the fob.

Please help its driving me crazy had no remote locking for several years and finally got Ross Tech Cable and still have to use the door lock

Oh and everything else to do with the CCM works fine!

 

[towcester vag]

erase the learned values first
adaption 00
then code remote

 

[Phillips1795]

Have done that before every attempt. Have bought another CCM to try that.

 

[actionman]

is the fob you're trying to sync 1 you've just bought? if so did you buy the correct part number? i'm not trying to be condescending but i come across a lot of people that buy a remote just because it looks the same as their original remote.

Also 2002 is a change over year for Toledo remotes 2000-02 uses a 1j0959753n & 2002-04 uses 1j0959753ct

 

[Phillips1795]

Yeah it's the right one I made that mistake a while ago lol. So now have the right one at the right frequency. Not even the original car key fob will sync.

 

[actionman]

is it a genuine Ross-tech cable & software?

 

[Phillips1795]

Yep

 

[actionman]

ok, i'll be down your way in November so can call in if you want & take a look. I've got a few other bits of kit for doing keys/remotes other than VCDS.

Is the original or replacement CCM fitted?

 

[Phillips1795]

Only bought the replacement yesterday so will keep you posted when it arrives and I've fitted it

 

[actionman]

ok, does the CCM part number you've bought match your original CCM?

 

[Phillips1795]

Yeah

 

[actionman]

sound, see how you get on with that

Just 1 more question, have you altered the soft coding at all or have you purely just gone into remote adaption channel?

 

[Phillips1795]

Haven't touched the coding just been using the adaptation

 

[actionman]

ok, bit odd why it's not allowing adaption if the remote positions have been cleared. Had this with a couple of other VAG. Customers remotes wouldn't code, tried 2 out of my van & they coded straight in

 

[@udi A3]

I cant find a good reference to that code on rosstech website...

 

[Phillips1795]

My mistake! its 01179

http://wiki.ross-tech.com/wiki/index.php/01179

 

[@udi A3]

What does measurng block three tell you?
Does the 0000 in field 4 change at all when you press buttons? how many remotes are stored?

 

[Phillips1795]

Nothing changes in the measuring blocks and says one key stored

 

[Phillips1795]

When I get the new CCM will let you all know what happens

 

[@udi A3]

Dead batteries or as craig said bad remotes.