Tarraco wing mirror covers

[Markymate]

Hi everyone. I've ordered a FR sport, I want to change the wing mirror covers for body colour ones( in primer ready to be sprayed). I've been told that the Ateca ones will fit but just want to have it confirmed. I've found the Tarraco ones but have been quoted £171 for the pair, which I think is a bit over the top.

 

[Tell]

You need to cross check the part number. If they are the same I doubt they would re number them. Sound like you need the parts desk to give you the two part numbers. I believe there are parts sponsors on the board you might want to check with.

 

[Markymate]

You need to cross check the part number. If they are the same I doubt they would re number them. Sound like you need the parts desk to give you the two part numbers. I believe there are parts sponsors on the board you might want to check with.

Cheers Tell.

 

[Markymate]

Nearly finished my little project with the wing mirror covers. Got both original parts of Ebay for £46, Seat wanted £171 for the pair!! Got the Merlot red paint code from Seat and had the paints made up by Automotive paints in Brighton. It comes in 2 parts, a ground coat and top coat reds, followed by a clear coat. I'll give a couple of days to fully dry out then sand back, fast cut then polish, that'll get rid of the orange peel effect. Will post the finished covers when done. Really pleased as I've never done this before.

 

[Tell]

Did you end up with the Ateca ones. Part numbers the same or are they different.

Always satisfy a bit of DIY that works.

 

[Markymate]

Yep, both was for the Ateca, but they are the same part number's as the Tarraco so bloody hoping they are the same

You're right, I'm well satisfied with the result, just don't want to muck up the last bit!!

 

[Markymate]

Finally finished the wing mirror covers. Really pleased with the finish article, just hope they match the colour of the rest of the car when it arrives

 

[Tell]

They look very presentable.

 

[Markymate]

Cheers, Tell. To be honest, I'm well chuffed with the out come. Can't wait to get them on the car!!