jakesc

Guest
Hi,

This is my first post so sorry if ive put it in the wrong section!

Ive just picked up some audi tt ronal alloys (6 spoke)that i won on ebay for 50 quid ( bargain me tinks!) I bought them really just for the tyres because they have a brand new set on them; plan was to just swap them over onto my starfish ones i have at the moment!

anyway After looking at them though im starting to wonder how they will look on the cupra, so the question is will i need different wheel nut or will the original leon ones be ok??

I know the stud pattern is correct and pretty the offset is ok aswell?

Any help would be appreciated!

Oh and views on how they will look are welcome too as im still torn with what to do! haha

Ta!!

Jake
 
spot on cheers both! I like the look of them actually. well chuffed considering i was only really after the tyres haha!
 
That's how they look on my mk1 [B)]
no spacers yet 225/45/17 tires, all of them are 32 offset so look wider(better :)
a583a18s-960.jpg

3043a18s-960.jpg
 
Last edited:
The blue car died on NesHaRim. Driver is ok, no damage, except psychological ... :cry:
He bought A3 1.8t shortly after that. There were no Leons on sale at that time . . .

EY2_-Tk3mbQ4j0h_h1AVgd_unpN-zdI5GXDLZ5gch80
 
Last edited:
Dino33 - Ideal! thanks for that, mine's the same to your's so thats great! out of interest how much is yours lowered by??

Think they are definitely going to be going on the car haha

Thanks all for the input! very helpful forum! haha
 
It's lowered about 35mm on Weitech springs and shocks + POLYBUSH front top mounts.
Still a lot of wheel gap on the fronts but I just cant go down any more, the roads here are awful :(
 
I'm thinking of getting a set as track wheels. I've been told they are heavy but I'll have to get bargain hunting on eBay by the sound of it!
 
almost 3kg more than starfish . . . Well they are not OZ superleggera :)))))))))
I used to have Lenso 18s, they were stupidly heavy, never measured exactly how, but I actually felt my car was lot less rapid . . .