vag com code help please

[DJ Walkers]

got my vag com working and got all this gubbins dunno what it means! any help much appreciated


VAG-COM Version: Release 409.1-US


Chassis Type: 6K - Seat Ibiza
Scan: 01,02,03,08,15,17,25,35,56

-------------------------------------------------------------------------------
Address 01: Engine
Controller: 6K0 906 032 AA
Component: 1.8L 20VT EU3 G 0002
Coding: 10500
Shop #: WSC 47688
5 Faults Found:
17964 - Charge Pressure Control: Negative Deviation
P1556 - 35-10 - - - Intermittent
17968 - Shareware Version. To Decode all DTCs
P1560 - 35-10 - Please Register/Activate - Intermittent
16795 - Shareware Version. To Decode all DTCs
P0411 - 35-00 - Please Register/Activate
18011 - Internal Control Module Failed Self-Test
P1603 - 35-10 - - - Intermittent
16955 - Shareware Version. To Decode all DTCs
P0571 - 35-10 - Please Register/Activate - Intermittent
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 03: ABS Brakes
Controller: 1J0 907 379 AF
Component: ASR 20 IE CAN 0001
Coding: 13404
Shop #: WSC 00000
No fault code found.

 

[DPJ]

17968 P1560 Maximum Engine Speed Exceeded
16795 P0411 Sec.Air Inj.Sys. Incorrect Flow Detected
18011 P1603 Internal Control Module Malfunction
16955 P0571 Cruise/Brake Switch (A) Circ Malfunction

 

[DJ Walkers]

is that a list of possible problems?

 

[pdcupra]

17964 - Charge Pressure Control: Negative Deviation

im also interested to know the solution to this

 

[DPJ]

You'll probably get rid of the first 3 with a reset - 18011 P1603 is an ECU internal error.

 

[DPJ]

16955 P0571 Could have something to do with your brake light switch. Are they working?

Buy yourself a Vag-Com licence (cheap at today's exchange rate) and get those codes reset. See what comes back.

 

[DJ Walkers]

had a look tonight found the pipe circled rd disconnected so i re connected it to the part circled white

will this be the problem?

cheers

 

[DPJ]

I think that might have been what threw your secondary air code.

Get them reset and see what comes back.

 

[DJ Walkers]

cheers mate, any idea how you reset it with vag com?

 

[DPJ]

cheers mate, any idea how you reset it with vag com?

You need a licenced version to do that.

 

[DJ Walkers]

thought so cheers for ya help

 

[ChrisCurzon]

can you not just unplug battery adn leave for 10 mins then plug back in think this clears fault codes if nto reacuring ones anyway.

just on a side note how do you clear them if you have full vag com then?

 

[DPJ]

can you not just unplug battery adn leave for 10 mins then plug back in think this clears fault codes if nto reacuring ones anyway.

just on a side note how do you clear them if you have full vag com then?

No, I don't believe battery disconnection clears fault codes.

On the full version, say you have a fault code under the engine module 01. You go into that module and click the button ' clear fault codes'.

 

[CupraPower]

Just stick the error code on Ross techs website

http://wiki.ross-tech.com/index.php/Main_Page



Ie: 16795

http://wiki.ross-tech.com/index.php/16795/P0411/001041