what did you and your mk3 leon do today

Stevie1

Active Member
Jul 21, 2019
19
9
Went for a 230 mile roadtrip....shame about the weather!
 

Attachments

  • 84D9EB9C-514D-432A-BAB4-FE5D18666F0F.jpeg
    84D9EB9C-514D-432A-BAB4-FE5D18666F0F.jpeg
    2.1 MB · Views: 164
  • C958D3BF-CE51-468A-B1C7-6A8FBDB16C4B.jpeg
    C958D3BF-CE51-468A-B1C7-6A8FBDB16C4B.jpeg
    518 KB · Views: 161

Damo H

Remind me, what's an indicator?
Staff member
Moderator
Oct 3, 2012
4,714
2,809
Car Length In Front
OK so my brother has challenged me for a race tomorrow. Rolling race obviously. He has a stage 2 VW Beetle 2012, tuned and downpipe. Based on the MK6 GTI with a K06 turbo, 200 hp stock. Tuner says around 300 hp and 460 nm based on previous dynos but not dynoed his car. DSG gearbox, 6 speed. He is about 200 kg lighter.

What do you think? :)

Edit: Mine is a Leon Cupra ST 4Drive with JB4 map 6 and MST full intake, should be around 360-370 hp.
Probably the wrong place to ask this if you’re taking or doing it on a UK or Mexican road.

If you’re doing it on track then the numbers suggest:

Cupra 4drive ST 1557kg with 350hp =
225hp per tonne.

Going off of your figures on the beetle:

Beetle 1357kg with 300hp =
221hp per tonne.

But as yours has more drag not only as weight but on the drivetrain as well, he may have the edge.
 

Zer0

Active Member
Jun 22, 2019
522
242
Probably the wrong place to ask this if you’re taking or doing it on a UK or Mexican road.

If you’re doing it on track then the numbers suggest:

Cupra 4drive ST 1557kg with 350hp =
225hp per tonne.

Going off of your figures on the beetle:

Beetle 1357kg with 300hp =
221hp per tonne.

But as yours has more drag not only as weight but on the drivetrain as well, he may have the edge.

Ah yes should be close, we'll see tomorrow. :) Not testing on public roads, don't worry.
 

Damo H

Remind me, what's an indicator?
Staff member
Moderator
Oct 3, 2012
4,714
2,809
Car Length In Front
Ah yes should be close, we'll see tomorrow. :) Not testing on public roads, don't worry.
Where he has you though is torque. This is going off of the official JB4 figures

Cupra 4drive ST 1557kg with JB4 350-365Hp/460-490Nm =
225-234hp per tonne.
295-314Nm per tonne.

Going off of your figures on the beetle:

Beetle 1357kg with 300Hp/460Nm =
221hp per tonne.
339Nm per tonne.
 

Damo H

Remind me, what's an indicator?
Staff member
Moderator
Oct 3, 2012
4,714
2,809
Car Length In Front
Where he has you though is torque. This is going off of the official JB4 figures

Cupra 4drive ST 1557kg with JB4 350-365Hp/460-490Nm =
225-234hp per tonne.
295-314Nm per tonne.

Going off of your figures on the beetle:

Beetle 1357kg with 300Hp/460Nm =
221hp per tonne.
339Nm per tonne.

And if we go off the offical kerb weight not your figures:

Beetle 1230kg with 300Hp/460Nm =
243hp per tonne.
374Nm per tonne

But this is all assuming his tuners figures are accurate of course.
 

Zer0

Active Member
Jun 22, 2019
522
242
@Damo H

Just checked, weights are closer than I thought. His is a Beetle Convertible, official figures say 1530 kg with driver and fuel compared to 1614 kg in mine.

Mine being 4wd it will not be as efficient as fwd once moving but since it is a DSG 7 the gear ratios will be beneficial compared to DSG 6 which he as, at least in the 60-120 mph range.
 
  • Like
Reactions: Damo H

SteveFR

Active Member
Dec 7, 2016
94
14
Bucks
Topped up the coolant tank with G13 plus Quantum Mixing Water, after spotting some fluid on driveway by driver's door.

Hopefully just a bit of air in system, as I spent £700 having the coolant pump replaced last autumn (P2681 fault code) which left my car out of action for a week.

20200316_173453.jpg 20200316_173536.jpg
20200316_174404.jpg
 
Oct 6, 2019
3
0
Put the EZmods front overlays on which dont require a photo as most people know what they look like.
Went to fit fan washers, easiest thing ever, tried them out and what a load of p*sh, I think I will actually order OEM instead of far east knock offs :idea:.
Quite glad im slender and had a little look underneath for the Dog mount to see what version I need and safe to say it had been ordered.
 

R45HU

Active Member
Jan 10, 2020
108
36
West Yorkshire
Rieger splitter and diffuser landed so looking forward to fitting it on my day off.
 

Attachments

  • 4505F040-E354-4C19-A671-EFAD9193E324.jpeg
    4505F040-E354-4C19-A671-EFAD9193E324.jpeg
    1 MB · Views: 145
  • Like
Reactions: br.adam

Jimiaces

Active Member
Nov 25, 2018
7
0
Fitted a dogbone mount yesterday since I had some free time:help: not too difficult at all, other than 25minutes with a junior hacksaw blade to remove the old one. took it our for a spin, a little bit of vibration in reverse but oh so worth it! Smother gear changes and no wheel hop.

Going to replace my disks and pads today, had everything delivered over a month ago so ready to go.

Probably wash and clay bar it after that.