-
Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now
JD_SCN
Guest
Hi mate, type it in on ebay, got mine in the correct colour on there for £20!
Just pushes in, they are the official seat ones and come boxed etc. Don't have the link but were easy enough to find!
im thinking of changin mine from silver to gloss black, how do you take the covers off anyone know
Looks like you have the same car as me ? ... thats the one thing i find odd ....the silver wing mirrors ... chrome or black yes but why the 'looks like they came off another car' colour
Last edited:
I have a couple of silver ones if interested -
I changed mine to the gloss black ones quite a while ago - they just clip on/off
I changed mine to the gloss black ones quite a while ago - they just clip on/off
I have a couple of silver ones if interested -
I changed mine to the gloss black ones quite a while ago - they just clip on/off
duno how u managed that one mate... mine were held on with small torx screws behind the mirror glass aswell as being clipped
The cover pops off by running a plastic kitchen spatula along the joint. Make sure you get it right under the joint, it can be a bit stiff
As i've already said above...
The cover does not just pop off.... my ones were secured from the inside of the mirror housing with (from my memory) 3 small torx screws.
Unless seat have changed this then i do not see how people are just "popping" them off?
SEATgod
Guest
The three small torx screws are to hold the mirror assy on....
You don't even need to remove the glass to change the cover....if your good!! ;-)
Just be careful as you may break the tabs with excessive force!
If you are unsure...come back!!
You don't even need to remove the glass to change the cover....if your good!! ;-)
Just be careful as you may break the tabs with excessive force!
If you are unsure...come back!!
When u pop out my mirror glass, the assembly behind gets unscrewd and then theres a seperate screw or 2 that actually goes into the mirror cover itself.
i found this out as when i tried to pop my originals off, the first one would budge and then when forced, broke off. on lookin in to see what happened , it was then the screw going into the cap was noticed.
I'll take them apart this weekend and post up pics actually.
JD_SCN
Guest
I did all the popping out the glass thing and it didn't work, I just got a blunt kitchen knife and levered the mirror from the side nearest to the car, it just popped off. SIMPLE! then the replacement ones popped on with a firm push.
I moved from silver to black too cause i'm going for a stealth look with no badging and black whatever I can get!
I moved from silver to black too cause i'm going for a stealth look with no badging and black whatever I can get!
SEATgod
Guest
Mirror housing cover: removing
– Undo the mirror casing tabs -2- using a flat screwdriver.
– Remove the mirror casing -1- from the wing mirror unit -3- using the lever -U-30800-.
Must have special screw on mirror covers.........sorry cant post the picture from ELSA showing how to pop the cover off by moving the tabs!!!
– Undo the mirror casing tabs -2- using a flat screwdriver.
– Remove the mirror casing -1- from the wing mirror unit -3- using the lever -U-30800-.
Must have special screw on mirror covers.........sorry cant post the picture from ELSA showing how to pop the cover off by moving the tabs!!!
almac
Guest
I found the local car wash took off my standard fit mirror covers quite nicely. When I get round to fitting my gloss black ones, the car'll be shiny clean to match.
Similar threads
