-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
start with getting yourself some 10w 330 ohm resistors (at least 2) and cut the N112's off and place them there. Then remove the black metal tray of the N249 which you no longer need if you're not using the cover.
Then replace all vac lines with blue 4mm and try and keep em as much out of sight as possible.
that there shouldn't cost more than an hour work (Max!!) and about 10 quid.
Then you can get an open airfilter, and remove the big ugly airbox you have now.
it will look something like this: (but here is still has the N112's)
then you can change all the black hoses for blue 1 by 1.
You could also sand and polish your inlet, chargepipe and rocker cover, which doesn't really cost much except a lot of time!
Then replace all vac lines with blue 4mm and try and keep em as much out of sight as possible.
that there shouldn't cost more than an hour work (Max!!) and about 10 quid.
Then you can get an open airfilter, and remove the big ugly airbox you have now.
it will look something like this: (but here is still has the N112's)
then you can change all the black hoses for blue 1 by 1.
You could also sand and polish your inlet, chargepipe and rocker cover, which doesn't really cost much except a lot of time!
Mat
Guest
what the dutchman said. N249 and N112 bypass
maybe relocate battery
If you want clean, wash down with something like Sufex HD or some other degreaser, and then protect the rubber/vinyl etc with 303 Aerospace (http://www.cleanyourcar.co.uk/interior/303-aerospace-protectant/prod_366.html)
maybe relocate battery
If you want clean, wash down with something like Sufex HD or some other degreaser, and then protect the rubber/vinyl etc with 303 Aerospace (http://www.cleanyourcar.co.uk/interior/303-aerospace-protectant/prod_366.html)
coco_cupra
Guest
Mat
Guest
get some pipes, vacuum hoses and make a neat job...always look good after n249 removal..
remove those n112's!
get some pipes, vacuum hoses and make a neat job...always look good after n249 removal..
Two things mate.
1. is your filter inside you wing because i dont see one.
2. you missed one i spy me a black hose. do ya see it do ya see it do ya huh huh.
looks really neat tho i like it.
get some pipes, vacuum hoses and make a neat job...always look good after n249 removal..
is this a neat job? it looks all over the place! not impressed!
I didn't want to be mean and say it, but kind of agree.
Try and hide the vac pipes more...
Two things mate.
1. is your filter inside you wing because i dont see one.
2. you missed one i spy me a black hose. do ya see it do ya see it do ya huh huh.
looks really neat tho i like it.
if you talking about the black t.i.p. i know yeh- its the LCR t.i.p. and needed one quickly and cheap so had be this black one....
But i like the vac pipes on show... as thee are red. to me it is 'neat' as they arnt just trown across the every where- they are ties in to keep tidy...
but each to their own......
Mat
Guest
i do belive i have a red one sitting in my bay.
altho its sourounded by the rest of the **** tho.
Similar threads
