Cupramvr's Leon cupra R

[WhiteIbiza_PT]

This car is Fenomenal!

I really like yellow color on a Cupra, it looks really like "racing style"!

Congratulations!

 

[CupraMVR]

thanks for your words pal

great pic of yours there have you got any more ?

 

[WhiteIbiza_PT]

thanks for your words pal

great pic of yours there have you got any more ?

Of course I have more photos of it!

I will put it today...


You have to be grateful for what I said, your car is just beautiful!

 

[Skorchio]

Hi mate, forgive me for not reading the whole thread but are you still on a stock K04?

 

[Mr_Dave]

He is

 

[Skorchio]

What have you/has he done to produce 350 ft/lb? the most i have seen even a hybrid do is 320. Must be boosting at 30 psi with a MBC?

 

[CupraMVR]

Yea still running standard turbo. its always been a torquey engine from when i started modding it. its running APR stage 2 map. got pipewerx 3" downpipe decat.i fitted a forge actuator and its set to 24 psi boost and holds it till red line. just produces alot of torque.
im looking at putting water meth on there next see if i can get closer to the 300 mark.

 

[Skorchio]

WMI is awsome stuff, and gave me awsome power gaines, with a new inlet mani, 300 bhb is easily obtainable on a stock tubby, just no one has done it yet

How many different rollers have you produced 350 ft/lb on?

 

[CupraMVR]

ive been on about 5 different rollers but i mainly been going on awesome's rollers.

 

[Skorchio]

Well if you got tha figure on all of them then you have a very good engine

 

[CupraMVR]

yea its pretty consistent but there is a few rollers i would like to go on cuz i think i would get better figure for the pub rights
lol

im thinkin of getting either devils own water meth just looking at different kits

 

[buch bdm 400]

ive been on about 5 different rollers but i mainly been going on awesome's rollers.

hey mate talkin about rollers i went on dyno dynamics today and it only made 329.2 bhp i was gutted on maha rollers it was 402.

 

[CupraMVR]

that aint good you getting a boost leak or was it hot in there? something aint right if you lost 70 bhp

 

[buch bdm 400]

there better be something wrong lol. they gave me a graph on my air/fuel. it said fuel was to rich. it was bloody freezing in there

 

[buch bdm 400]

then again they said it was only makin 1.6 bar but um my boost gauge it varies from 1.8 to 1.75 never 1.6 on high boost

 

[Skorchio]

You need to be careful mate, some people dont run the cars right, i went on a RR day and a 330 BHP cupra only ran 300 and Probees only runs 260 (286 norm). I would not dyno your car unless you 100% sure they know what they are doing.

MVR, Devils is awsome. I can highly recommend it Takes forever to set-up tho, allot of logging and fuel

 

[buch bdm 400]

You need to be careful mate, some people dont run the cars right, i went on a RR day and a 330 BHP cupra only ran 300 and Probees only runs 260 (286 norm). I would not dyno your car unless you 100% sure they know what they are doing.

MVR, Devils is awsome. I can highly recommend it Takes forever to set-up tho, allot of logging and fuel

i was having a million doubts about going. i shouldnt have gone i would have been more happier. anyone tried the aem water meth yet

 

[CupraMVR]

no not read up about aem water meth. i will do when i get the time

 

[probee]

there better be something wrong lol. they gave me a graph on my air/fuel. it said fuel was to rich. it was bloody freezing in there

you can see from my thread that our map is very rich... were they looking at requested too????

what was it running? i think 0.797 is requested

 

[Shaunyboy]

Whats the APR map like John?