forge induction kit

[jc_boc]

Fek!!!!!

 

[swampy06]

waiting for blueflame to get back to me for this now will post up later should be coming a milltek dealer aswell

 

[collegeboy09]

waiting for blueflame to get back to me for this now will post up later should be coming a milltek dealer aswell

Just go careful with them now, i was due to be taking my car up there before they went bust, luckily i checked on the day i was going up to confirm and couldnt get hold of them, everything looked dodgey on the web and turned out it was..very!!! Make sure you get everything they say confirmed as there promises for calling back a crap, they'll want your car for 5 days too

Just my opinion of course

 

[mardon]

Hmm not convinced about the new owners. The amount of companies i've seen go bust, take peoples money then restart again. I'll wait for th dust to settle and see their customer support first.

 

[CupraDean]

woah 5 days.... im out of it

 

[splinter26]

I've got my first service on the Boc coming up. What should i do regarding the induction kit? They've had the car in before with it on. So it's not like they don't know i've ever had it. Would i need to take it out for the service? I'd prefer not to.

 

[Deleted member 49882]

I've got my first service on the Boc coming up. What should i do regarding the induction kit? They've had the car in before with it on. So it's not like they don't know i've ever had it. Would i need to take it out for the service? I'd prefer not to.

I would probably remove it mate. Better to be safe than sorry.

 

[splinter26]

Yeah thought as much lol

Just tried replacing the old one and i'm having more trouble than i did fitting the Forge kit... The blizzard outside doesn't help. The clips on the metal braces which hold the piping in place are now about 2mm to wide for my pliers to grab, so i cant fit the piping back on...

 

[Spurt]

Just looking at the carbon fiber intake...there are no 'Forge' logos on mine at the moment (emailed them about this a new stickers are being sent out). Anyway...just trying to figure out if the intake should be facing a particular direction for fitting....clearly it should as there are differences when you look in either end of the carbon fiber intake.

Imagine holding the intake in front of you in both hands...which side should be facing the left or right when in the engine bay? I think I have a good idea and have shown below what I think...

Left handside...

Centre...

Right handside...

I think this is the correct arrangement, but can anyone just confirm if they know. Thanks

right little confused here at how this should be fitted, mines got no logos either. ive spoken to forge and from what he was saying on the phone the bottom picture should be the pipe side where the fresh air is going in. how have you guys fitted it and can anyone with a kit with a logo confirm there way. may have misunderstood on the phone but thats what i could make out.

 

[Tilley1]

when does this miltek exhaust come out? anyone know?

 

[jc_boc]

End of December is what they told me when I spoke to them.

 

[Rob-TSI]

Has anyone done a FR exhaust?

 

[Deleted member 49882]

right little confused here at how this should be fitted, mines got no logos either. ive spoken to forge and from what he was saying on the phone the bottom picture should be the pipe side where the fresh air is going in. how have you guys fitted it and can anyone with a kit with a logo confirm there way. may have misunderstood on the phone but thats what i could make out.

Right...the way I ended up fitting mine was as follows - looking at the induction 'can', on one side there is what looks like a projecting piece of plastic / rubber (the top picture in the arrangement shown above ) - I fitted this side to the intake hose as opposed to the engine block side because otherwise I thought it had to potential come lose and end up being 'sucked' into the engine. I think Dave 77 fitted his the same way as I did and has no problems. Let us know if you find out or come to a decision what to do.

 

[Spurt]

Yea uve got it the wrong way round mate swap it over. Made a thread in forge section to confirm. Just make sure thes no crap in it before switching other wise it will suck it in.

 

[Deleted member 49882]

Yea uve got it the wrong way round mate swap it over. Made a thread in forge section to confirm. Just make sure thes no crap in it before switching other wise it will suck it in.

Ok...I only had my kit on for a few hours, so there is no crap in it anyway. So, the arrangement shown in the pictures is correct? Must have a look at the thread you posted. Cheers