Wow the Fedex gods have heard my prayer, just received notice the package is delivered. Tonight Cobra time 
cobra exhausts?
- Thread starter rydogg09
- Start date
i have tried to upload a couple of pics on here but it is not allowing me too so i have created a long awaited album with a few pics in, one of which shows how the exhaust sits in the bumper arch....
Sorry for the repost, got some better pics, don't know why the others are still up as they have been removed.
After only having my new exhaust fitted for 3days, I am not happy with the tailpipe.
I just feel the 6x4" oval doesn't sit right. Don't know if it's projecting too far out or too low.
Anyways I contacted C&C and they can change the tailpipe to a different style for me, just don't know what to go for. Was looking at a few other LC for ideas.
Either back to an angled cut twin or a smaller oval set further back slightly.
Pictures to follow... thoughts appreciated.
After only having my new exhaust fitted for 3days, I am not happy with the tailpipe.
I just feel the 6x4" oval doesn't sit right. Don't know if it's projecting too far out or too low.
Anyways I contacted C&C and they can change the tailpipe to a different style for me, just don't know what to go for. Was looking at a few other LC for ideas.
Either back to an angled cut twin or a smaller oval set further back slightly.
Pictures to follow... thoughts appreciated.
Thanks lee
That's what I was thinking just wasn't sure.. Needed a second opinion.
I can get it cut back and rewelded, the problem being the centre section to back box section is a clamp fix not a sleeve, so the adjustment wasn't great.
Do you think I could get the clamp fixing cut off and replace with a double sleeve?
As this would allow everything to be adjusted better?
That's what I was thinking just wasn't sure.. Needed a second opinion.
I can get it cut back and rewelded, the problem being the centre section to back box section is a clamp fix not a sleeve, so the adjustment wasn't great.
Do you think I could get the clamp fixing cut off and replace with a double sleeve?
As this would allow everything to be adjusted better?
clamp you mean gasket and nuts n bolts rather that the regular exhaust clamp?
Can the centre section be pushed on more? this will move the tail pipe back under the bumper
Can the centre section be pushed on more? this will move the tail pipe back under the bumper
I know strange that...
The guys at C&C did say that they see this thing quite abit on exhausts, it can usually be adjusted by rotating the sections slightly but due to the gasket connection, this becomes difficult.
On a Seperate note the new pictures I uploaded have changed back to the ones I deleted?? Or is just me..lol
The guys at C&C did say that they see this thing quite abit on exhausts, it can usually be adjusted by rotating the sections slightly but due to the gasket connection, this becomes difficult.
On a Seperate note the new pictures I uploaded have changed back to the ones I deleted?? Or is just me..lol
i have just checked how mine is sitting and it fits liks a glove with the slight alterations on the rear brace.
hope this attempt at attaching works....
http://www.seatcupra.net/forums/album.php?albumid=1489&pictureid=4924
hope this attempt at attaching works....
http://www.seatcupra.net/forums/album.php?albumid=1489&pictureid=4924
Last edited:
Cheers chris,
I've just been unlucky with mine..
Hopefully the guys will get it sorted.
I will upload some pics after the 2nd visit.
I've just been unlucky with mine..
Hopefully the guys will get it sorted.
I will upload some pics after the 2nd visit.
Similar threads
