SWANSWAY CUPRA Dealership

Platinum LCR, 19" Porsche rims & flip plate *UPDATED PICS PG17*

  • Thread starter Deleted member 12147
  • Start date
Yeah the rear clips on mine occasionally cause the windows to roll back down. They do stay up the second time you roll them up:shrug: I'll have to see if there is any adjustments I can make to the clips but its no biggie I could live with it.
 
After a bit of a c*ckup on the sellers side I finally recieved my double din console.

Still unsure if i'm gonna fit it yet though I may end up selling it.

Untitled.jpg


Untitled-1.jpg
 
Last edited by a moderator:
Yeah im not gonna fit the cage the guy just sent it with the console.
 
Small Update:

Had my clutch replaced yesterday thanks to Midland VW also just booked my car in at REVO for the new Stage2 linear remap upgrade:)
 
Last edited by a moderator:
Nothing special just a standard one mate when it goes again i'll look to upgrade. It's gonna cost £50 for the revo upgrade so I thought I'd give it a go.
 
The standard one's can last pretty well on our cars I've found, but I will be uprating it soon as I want more track time.

Let us know how you get on with the linear update to the map mate.
 
t0m said:
The standard one's can last pretty well on our cars I've found, but I will be uprating it soon as I want more track time.

Let us know how you get on with the linear update to the map mate.
Click to expand...

Will do.
 
drka-drka said:
Quik question mate on the front grill, for the honeycomb sections did you glue them together? And if so what with? I was just gonna use Araldite
Click to expand...

You could use araldite, I used this stuff got it from B&Q it's flexible, fully weatherproof and paintable BUT can be messy to work with.

4d4df7b4.jpg
 
Last edited by a moderator:
I decided to get the car ready for next weeks stage2 Revo linear remap. So been busy replacing the spark plugs, fuel filter, pollen filter and I broke out the ultrasonic cleaner and cleaned my injectors and FPR.*

During the first clean

50b49461.jpg


During the third clean

03907b86.jpg


Plugs

2711c288.jpg


86451a14.jpg


It's running alot smoother now, I couldn't believe how much crap came out of the injectors. Admittedly the exterior of them were dirty aswell but the came out gleaming.
 
Last edited by a moderator:
Good for you buddy. Dolby's thoughts about the Revo linear Stg 2 map seem really positive. Hopefully you achieve the same benefits, especially with the service that you've given the car. I hadn't even given the injectors a second thought. Is the cleaning equipment specialist and expensive? I suppose if you don't have access to such, you'd send it out to a specialist to clean?

I look forward to hearing how the car gets on :)

ECS cough cough :D
 
Lol ecs is on the list mate watch this space. It's booked in on Wednesday but the weather is supposed to be sh*t so may not be able to give it the full beans. You can sen the injectors off to be cleaned but it's a piece of cake to do, took me about 2 hours an 1hour of which was letting them dry out in the sun while I changed the plugs. I got the ultrasonic cleaner from maplins it was £30 and the concentrate cleaning fluid was £10, so wasn't that expensive tbf.
 
Good work cleaning the injectors! Not thought about doing this, but really should...
 
You must log in or register to reply here.

Similar threads

AVCUPRA290
Grey & black cupra mk3 sub8 2016
Replies
10
Views
3K
AVCUPRA290
AVCUPRA290
A few questions re my new (2021) 2.0 TDI SE Dynamic that I've now had for a month...
Replies
1
Views
1K
davem75
My MK1 Cupra R Leon from Ireland
Replies
3
Views
2K
Nathan penney
Nathan penney
Tell
  • Sticky
Updating the inbuilt Mib3 Satnav Offline
Replies
284
Views
68K
Tell
Tell
Alan0210
Cupra 280 v Curpa R pt 1
Replies
2
Views
2K
Alan0210
Alan0210
Chris Knott Insurance - Competitive quotes for forum members
Top Bottom
Back