-
Guest, New Stock alert: Premium CUPRA valve caps now available in the store ? Order now from the merchandise store
What did you and your MK2 do today?
- Thread starter Tfsi_Mike
- Start date
Funnily enough iv just read afew reveiws on the cleanser. Apparantly that and the HD wax cant be faulted. Good luck!
You won't be dissapointed, the HD wax is very good and is quite durable.
I always use Autoglym Super Resin Polish and then seal over it with Autoglym HD wax.
I also use the Meguires Clay Bar kit
here's a couple of pics of mine after claying, polishing & topping off with HD wax:
Last edited:
I just got HD wax too, so wash, dry, clay bar, then wash, dry, SRP, Hd wax?
Whats the paint cleanser/cleaner stage ie stage1 meguairs? When would i use that?
Whats the paint cleanser/cleaner stage ie stage1 meguairs? When would i use that?
Spray/hose down car to remove loose dirt
Wash car using the 2 bucket method & a microfibre wash mit
rinse off car
leaving the car wet use the claybar, you must keep the paintwork wet while using the claybar, which is why you are supplied with a detailer spray.
The claying process removes any ingrained contaminents from your paintwork, leaving the finish like glass
once clayed, rinse off again to remove the spray detailer
dry using a microfibre towel
Apply Autoglym SRP & buff off
Apply Autoglym HD Wax & buff off
stand back & admire your efforts
for extra buftyness:
clean windows outside & in with Autoglym fast glass & dress the tyres with Meguires endurance tyre gel
Last edited:
Last edited:
You won't be dissapointed, the HD wax is very good and is quite durable.
I always use Autoglym Super Resin Polish and then seal over it with Autoglym HD wax.
I also use the Meguires Clay Bar kit
here's a couple of pics of mine after claying, polishing & topping off with HD wax:
Looks good!!!!
I will wash
Clay
Wash
Meguiars swirl X- buff
Meguiars ultimate polish- buff
HD cleanser- buff
HD wax- buff
Stand back and admire the work,well that's what I hope.
Cheers! That was a very useful read
Data from yestetday brake tester Cupra R are:
331.29 hp, torque 424.2 Nm
Sent from CiLA iPhone
Sent from CiLA iPhone
I respect your opinion.
However, I've seen a vast difference on mine. My wife's black altea looks really good as well. Really good product.Has anyone tried the deep cleanser before applying the HD wax?
Do not let the cleanser go dry!! I repeat, do not let the cleanser go dry!! It is a fecking nightmare to get off if it drys out!!
I would only do half a panel at a time or quarter of the roof at a time!
It's good stuff but is very difficult to rub off when it drys onto the car!!
I forgot to mention that I do not have a machine and I hand polish, wax etc, maybe different if used with a polishing machine! I use detailers choice microfibre cloths from Costco.
I would also de- tar and de iron with iron x before claying. You risk swirls and holograms if you spread the tar at the clay and polish stage. AND, an somthing to remove all previous wax left on.....
Anywhere up to 5 layers of SRP which has a cleaner/cleanser/glaze so no need.
Basically its all preperation for polish to minimize risk of damage.
Its easy to ruin black paint, i know, its a $hitter....
Last edited:
Iv been using AG extra gloss protectant. Its not a wax but a last stage easy on and easy off. Also tried AG ultra deep gloss which is a nightmare to use (probably putting too much on!)
I really want to try some HD wax its 30 on ebay
I really want to try some HD wax its 30 on ebay
Similar threads
