what have you done to your car today ?

[akchappers]

yeah because they still look fast when stopped

Only when every other car is in reverse mate!
Ak

 

[LEE69]

touché

 

[akchappers]

Turtle?
Ak

 

[RaviR50]

Yeah that's lowered and stretched to.

actually that's slammed with stretch ands a fook load of negative camber

 

[Azza_]

fixed the dipstick guide i broke, luckily it only cracked and didnt shatter and fill the sump like ive seen some peoples! a sharp tug (ooo er) and it came free!

also temp fixed a leaky pcv pipe should hold till i order a replacement

 

[dazjstuart]

Replaced the front discs and pads with mintex ones, much better, the old ones still had plenty of life but were rusty as hell and really dusty.

Replaced the upper crank breather (y - shaped one that always breaks) with a CM silicone one. Was shocked how badly the old one had rotted, full of bits of crud and rubber! Managed to split the lower crank breather whilst installing the new hose , knew I should have just bought the whole lot!

Got it MOT'd without issue

 

[akchappers]

Realised I have some clicking turning sharp corners!
Ak

 

[Azza_]

another couple of jobs done! my stainless ebay heatshield is fitted altho not perfect fit its good enough!

and the rear interior lights changed to leds!

 

[akchappers]

another couple of jobs done! my stainless ebay heatshield is fitted altho not perfect fit its good enough!

and the rear interior lights changed to leds!

Good man!
I've installed a door handle led too! Really bright at night!

Ak

 

[Azza_]

Good man!
I've installed a door handle led too! Really bright at night!

Ak

i fancy doing something like that but id do it behind the handle kind of tucked away fairly simple i take it? you wired it up to the puddle light?

 

[W11TTX]

Today iv been thinking of selling or breaking it!

 

[LEE69]

Replace all the mods for standards then sell it as standard as you can, worked for us very well.

 

[W11TTX]

Yeah I could do, not got all standard parts as it came with exhaust tip and 007. So only coilovers induction stereo and decat to put it back to how it was really. Just thinking of saving money and buying a golf diesel or something! Or maybe a van

 

[LEE69]

007 sell get a 710n plenty good s/h ones on the facebook sites

 

[csd_19]

Had the low speed fan fault finally appear after 12 years, ho hum

Time to find "that thread" and get it fixed, if I can be bothered

 

[LEE69]

http://website.lineone.net/~alan.james.lorely/fan mod/Repair.html

 

[csd_19]

http://website.lineone.net/~alan.james.lorely/fan mod/Repair.html

Legend mate did you have that as a favourite or something??

 

[LEE69]

Yeah folder full of useful links.

 

[akchappers]

i fancy doing something like that but id do it behind the handle kind of tucked away fairly simple i take it? you wired it up to the puddle light?

Yes mate! Bit if a pig to do but good! Just remember mechanism is to the left of the handle etc and you don't want wires catching!
Ak

 

[W11TTX]

007 sell get a 710n plenty good s/h ones on the facebook sites

I might look into that, can't decide what to do. I'm gettin married next year and maybe the extra cash would help, been browsing the net at golf mk4's and a4 tdi's