What did you and your MK2 do today?

[[M]ike]

Nice. That's a lot of coin

I didn't go for the ceramic coated one though. Just the powder coated one, still pretty expensive..

 

[AndrewJB]

I've ordered the ceramic one

Sent from my GT-I9505 using Tapatalk

 

[WeeG]

I've ordered the ceramic one

Sent from my GT-I9505 using Tapatalk

I have the ceramic one, defo the choice

 

[AndrewJB]

Yeh replacing the neuspeed

Sent from my GT-I9505 using Tapatalk

 

[Jhunter_83]

Just ordered my BCS exhaust system to my Cupra R

Robert

This is a good piece of kit, nearly ordered one for my mk6 Golf Gti at the start of the year.

 

[PLuKE]

My 12mm spacers came, so ran outside and fitted them, and some 5mm on the front to.

Didn't want to go to much as it's on standard ride height and just wanted it to look better and not stick out to far. Then a 2BM wash and a wipe over with Z6 and tyres dressed.

Luke

 

[p11lkw]

My 12mm spacers came, so ran outside and fitted them, and some 5mm on the front to.

Didn't want to go to much as it's on standard ride height and just wanted it to look better and not stick out to far. Then a 2BM wash and a wipe over with Z6 and tyres dressed.

Luke

Have got any pictures ?

 

[PLuKE]

I have a few quick ones. That I thrown on FB.

Going to get a few snaps soon.

Luke

 

[percy555]

Hi all, purchased 4 Audi 16" alloys today, cleaned them up and getting Bridgestone winter tyres fitted on Monday.

 

[holmefield]

Well fitted my 10mm hub centric spacers up front ( final E.T 41 ) and my 15mm hub centric rear spacers ( final E.T 36 )

With the drop from the Eibach sportlines the final results look good, the wheels just sit inside of the arch lip....

 

[Benzy]

Well fitted my 10mm hub centric spacers up front ( final E.T 41 ) and my 15mm hub centric rear spacers ( final E.T 36 )



With the drop from the Eibach sportlines the final results look good, the wheels just sit inside of the arch lip....

Get some pictures up mate

 

[AndrewJB]

Gas bonnet strut finally fitted, had the plates fitted for a week but been waiting for the strut to be delivered

 

[[M]ike]

Well fitted my 10mm hub centric spacers up front ( final E.T 41 ) and my 15mm hub centric rear spacers ( final E.T 36 )

With the drop from the Eibach sportlines the final results look good, the wheels just sit inside of the arch lip....

Have to show us some pics mate.

 

[paul_zx6r]

Today I bought an eibach front arb

 

[PLuKE]

Well fitted my 10mm hub centric spacers up front ( final E.T 41 ) and my 15mm hub centric rear spacers ( final E.T 36 )

With the drop from the Eibach sportlines the final results look good, the wheels just sit inside of the arch lip....

Ye some pictures. You went abit wider than me, so be good to see the diffrence.

Are you on the 18"FR rims?

Luke

 

[holmefield]

Yer i'll take some pictures tomorrow when the weathers better...

I'm also toying with the idea of fitting an Linea R front grill, I've been offered a 2nd hand one posted for £50.00, is this a good deal????????????

 

[holmefield]

Ye some pictures. You went abit wider than me, so be good to see the diffrence.

Are you on the 18"FR rims?

Luke

Nar I'm on the BTCC 18" BBS seat alloys, I'm not sure whether there 7.5J or 8J thou???? but there fitted with 225/40/18 tyres....I think that when they need replacing i'll be putting 215/35's on thou, there a bit to much side wall for my liking in 225/40 profile....

Saying that I'm looking @ putting so 18" x 9J alloys on in the spring for a fat square setup!!!

 

[PLuKE]

Not the best view, but you get the idea, wheels hand aligned or settled as it's just off the jack.

Excuse the car, it was washed after this, Z7 and a Z7 wipe over, tyres dressed.

BEFORE, 5mm rear only spacers



AFTER 5mm front, 12mm rear

 

[PLuKE]

BEFORE



AFTER

 

[Joshkcupra]

I've noticed a strange noise coming from the right hand side front wheel when I turn the steering wheel on full lock, it sounds like a creeking noise, not sure if it's the wishbones/lower arms.. Hmm