Mondays Parts

[ben450]

Tommorow I'll be picking up the following for my LCR

Miltek non res catback
Hughes Engineering rear strut brace
Forge 007
Jetex Filter

Service parts

Oil Filter
Sump plug
Brake fluid
Oil pickup pipe
Sump sealent
Shim for gearbox
Gearbox cover
Wiper blades
New petrol cap
New wheel centre caps

Ordering Titan super pro race oil 5w 40

 

[Bouncerbeater]

Gonna be busy by the looks of that.
I have a full Milltek inc downpipe and tip to fit and a fmic as and when it arrives

 

[ben450]

Gonna be busy by the looks of that.
I have a full Milltek inc downpipe and tip to fit and a fmic as and when it arrives

Tell me about it mate. My mates gonna fit most bits on Sunday but I'm gonna get the miltek fitted in the week because I'm impatient lol. Downpipe and decat are on my list. Bet your looking forward to getting them fitted mate.

 

[R1TCH1E]

Tommorow I'll be picking up the following for my LCR

Miltek non res catback
Hughes Engineering rear strut brace
Forge 007
Jetex Filter

Service parts

Oil Filter
Sump plug
Brake fluid
Oil pickup pipe
Sump sealent
Shim for gearbox
Gearbox cover
Wiper blades
New petrol cap
New wheel centre caps

Ordering Titan super pro race oil 5w 40

Going to be a busy boy lol. Whats happened to the cobra turbo back exhaust idea? Is it your impatient like me and just need the noise lol.

 

[ben450]

Going to be a busy boy lol. Whats happened to the cobra turbo back exhaust idea? Is it your impatient like me and just need the noise lol.

I was gonna go that route mate but saw Bill saying that quite a few fitted with turboback Cobra haven't made good power. So thought I'd stick to the tried and tested route.

 

[Bouncerbeater]

Going the stealth route I am. Fully resonated Milltek so it don't make too much noise and the fmic will need to fit without losing the fogs. Then over to Badger5 to upgrade my stage 1 to stage 2. Has to be below the radar as it is the wife's daily driver.
Luckily she is the steadiest of drivers so shouldn't notice as she never goes above 50 mph even on a major road.

 

[googujube]

Good stuff mate. Not heard of the hughes engineering stuff, how come you've gone for that over the usual options etc?

Started getting my bits delivered to work so the wife doesn't find out.

 

[R1TCH1E]

I was gonna go that route mate but saw Bill saying that quite a few fitted with turboback Cobra haven't made good power. So thought I'd stick to the tried and tested route.

Nice one. Atleast youve got one now pal. Tempted to buy a cat back resonated cobra for now as i had one before and loved the sound. Then ill save for the 3" downoipe and decat. Will the 3" downpipe, decat fit onto the 2.5" cat back without modifications? Always wondered this.

 

[ben450]

Nice one. Atleast youve got one now pal. Tempted to buy a cat back resonated cobra for now as i had one before and loved the sound. Then ill save for the 3" downoipe and decat. Will the 3" downpipe, decat fit onto the 2.5" cat back without modifications? Always wondered this.

Think the catback is only 305. You might need a reducer that goes down to 2.5 inch but that won't be hard.

Hughes engineering made rear strut braces mate but there like hens teeth now.

 

[R1TCH1E]

Think the catback is only 305. You might need a reducer that goes down to 2.5 inch but that won't be hard.

Hughes engineering made rear strut braces mate but there like hens teeth now.

I think the resonated cat back is about £335 if i remember correctly. Non res is £305.

Not sure on which one to get as my work mate has a mk5 Golf R32 milltek non res catback and it drones really bad. But i dont think it will be so bad on the cupra?? My last cupra r had:


Revo Technik remap carried out by VAGTECH. This results in 265bhp and 287ftlb
SFS 80mm Turbo Inlet Pipe
Forge 007P Diverter Valve
Cobra resonated catback exhaust system
Cross drilled front & rear brake discs
H&R 20mm lowering springs
Powerflex dog-bone engine mount bush
Powerflex front wishbone bushes

I loved it to be fair and felt really fast compared to my Remapped focus ST.
put it this way it felt alot different to my 225 LCR i have now reason why i cant wait to get it all done haha.

 

[ben450]

I thiesonated cat back is about £335 if i remember correctly. Non res is £305.

Not sure on which one to get as my work mate has a mk5 Golf R32 milltek non res catback and it drones really bad. But i dont think it will be so bad on the cupra?? My last cupra r had:


Revo Technik remap carried out by VAGTECH. This results in 265bhp and 287ftlb
SFS 80mm Turbo Inlet Pipe
Forge 007P Diverter Valve
Cobra resonated catback exhaust system
Cross drilled front & rear brake discs
H&R 20mm lowering springs
Powerflex dog-bone engine mount bush
Powerflex front wishbone bushes

I loved it to be fair and felt really fast compared to my Remapped focus ST.
put it this way it felt alot different to my 225 LCR i have now reason why i cant wait to get it all done haha.

I had a powerflow on my 106 quicksilver when I was 20 and my god was it loud. Went Birmingham for Mac power and our ears were ringing lol. Def make sure you get the non baffled mate looks much better.

 

[R1TCH1E]

I had a powerflow on my 106 quicksilver when I was 20 and my god was it loud. Went Birmingham for Mac power and our ears were ringing lol. Def make sure you get the non baffled mate looks much better.

Yes mate non baffled like my last one was. Lol i can remember when i was 17 i had a 106 quiksilver which i spent a fortune on. I had the same, dual powerflow exhaust. 2 seperate backboxes and that sounded loud lol.
Couldnt beat my scooby though, had a full NUR Spec R exhaust on that and it was unreal. Used to wake all the neighbours up at 5 in the morning around by me. Was gutted to sell it but had to keep the peace with the neighbours lol.

 

[ben450]

Scoobys sound sweet. My neighbours are toffee nosed tossers so bollocks to em I say lol. My neighbour has got a civic type r that's proper loud and sounds **** so I'll be getting my revenge lol.

 

[R1TCH1E]

Scoobys sound sweet. My neighbours are toffee nosed tossers so bollocks to em I say lol. My neighbour has got a civic type r that's proper loud and sounds **** so I'll be getting my revenge lol.

Haha. Get a sound clip of it when its done. Would like to hear it how it sounds

 

[ben450]

Will do matey